How Wide Is a Washer and Dryer? Check the Space You Need
Measure the opening where the machines will sit before you decide what will fit. Many separate washers and dryers are about 27 inches wide each, but the exact width depends on the model.
For two machines side by side, you need room for both widths, not just one. A compact or all-in-one machine, which washes and dries in one unit, may be narrower. Doors, water and drain connections, and space for installation can also affect the fit. Here’s how to measure your space and check the listed width before you buy.
How wide is a regular washer or dryer?
A regular washer and a regular dryer are often about 27 inches wide each, but that is only a starting point. The exact width depends on the model, so use the dimension listed for the specific machine you plan to buy.
Look for the word “width” on the product page or in the manual. Don’t assume that a machine will match another one just because both are described as full-size. Even a small difference can matter if the opening between cabinets is tight.
Check the listed width from side to side, not the height or depth. Width tells you how much of the opening the machine uses. Depth tells you how far it extends into the room, which can also affect whether you can close a door or walk past it.
Do I add the washer and dryer widths together?
If the washer and dryer will sit side by side, add the listed width of each machine to estimate how much floor space the pair needs. For example, two machines listed at about 27 inches wide each would take about 54 inches across before you account for any space between them or at the sides.
That combined estimate is for the machines themselves. It does not automatically include room for hoses, nearby walls, cabinets, or space needed to move the machines into place. Check the installation instructions for the exact models before deciding that the opening is wide enough.
If the machines will be stacked, don’t add their widths. They occupy one footprint across, but the stacked height and the space needed for setup still matter. Confirm that the washer and dryer are approved for stacking together, and check the instructions for the required parts and dimensions.
Think about how the pair will be used, too. If a door swings into the narrow space between the machines and a wall, the machines may fit but still make laundry awkward. Measure the opening and the surrounding area, not just the floor directly under the appliances.
How do I measure the laundry opening?
Measure the space before ordering, then compare your measurements with the width listed for each exact model. A tape measure and a note on your phone are enough. Measure in inches and keep the numbers for the doorway, laundry space, and planned machine position separate.
Measure the opening. Stretch the tape from one side of the space to the other. If the walls or cabinets aren’t straight, check the width near the front and farther back. Use the narrowest measurement when deciding whether a machine can fit.
Measure the route in. Check doorways, hallways, and turns between the delivery entrance and the laundry area. A machine may fit in its final spot but fail to pass through a narrow doorway or around a tight corner. Ask the seller or delivery provider what dimensions they need to confirm for the delivery route.
Find each machine’s listed width. Check the product page or manual for the specific washer and dryer. If the page lists several dimensions, make sure you are reading width, not depth or height.
Compare the numbers. For side-by-side machines, add their widths and compare the result with the usable opening. Don’t count a gap beside a wall or cabinet as usable unless the installation instructions allow it.
Check the setup instructions. Look for any space the maker requires at the sides or back. Include that space in your plan before you order, rather than assuming the machine can sit tightly against a wall.
If the opening is close to the listed width, pause before buying. Door trim, an uneven wall, or a pipe that sticks out can reduce the space you can actually use. Recheck the narrowest point and confirm the installation requirements with the manufacturer or seller.
What extra room do doors and hookups need?
A close fit can cause problems even when the machine’s body fits through the opening. Doors need room to open, hoses need space behind the machines, and the installer needs access to make the connections. Check these points before you decide that the space is ready.
Door swing: Open the washer and dryer doors as far as the room allows. Make sure a door won’t hit a wall, cabinet, toilet, or the other appliance. Check whether the dryer door can be switched to open from the other side if that would help, and confirm that option for the exact model.
Water and drain connections: The washer’s water and drain hookups are the water and drain connections behind or beside it. A hose that bends sharply or gets trapped behind the machine can make setup harder. Leave the space required by the manual and don’t crush a hose to force the appliance into place.
Dryer vent or other connections: The space needed depends on the dryer and its setup. Check the instructions for the exact model, including any vent or power connection, rather than assuming every dryer needs the same arrangement.
Room for installation: The machine may need to be pulled out for hookups or future service. Ask the installer or seller what access the chosen model needs. Don’t block a shutoff valve or connection behind a fixed shelf.
Rear space: A common planning allowance is about 4 to 6 inches behind laundry machines for hoses, but the exact need varies by model and connection. Follow the manufacturer’s instructions if they call for more or less space.
Don’t force an appliance into a space by bending its hoses or pressing its back against a connection. If the hookups are crowded, stop and ask the installer or a qualified professional how to arrange them safely. A small layout change can be easier than dealing with a pinched hose or a machine that can’t be serviced.
Are compact and all-in-one machines narrower?
Compact machines can be narrower than regular separate washers and dryers, but the word “compact” does not tell you the exact width. Check the listed dimensions for the model. Also check its depth and height, since a smaller width does not guarantee that it will fit under a counter or through a doorway.
An all-in-one is one machine that washes and dries, so you only need to plan for one appliance’s width rather than two machines side by side. All-in-one designs vary, though. Confirm the width of the exact model and check that its installation instructions fit your space and hookups.
Don’t compare the width of one all-in-one with the combined width of a washer and dryer as if they were the same setup. Ask yourself whether you have room for one machine or two, then measure the space you actually plan to use. The right comparison is the listed width of each option against your usable opening.
Small spaces can also make access more important. In an apartment, RV, or tight laundry closet, check the route through the entry and the room needed to open the door. A narrow machine that cannot pass through the doorway, or whose door is blocked after installation, won’t solve the space problem.
For help comparing the wider buying decision, you can also read this guide to what to look for in a reliable washing machine. Keep the width and installation needs of the specific model in view while comparing options.
What kind of machine suits a tight space?
A compact washer, a compact dryer, or an all-in-one may be worth considering when two regular machines won’t fit side by side. An all-in-one uses one appliance position for washing and drying, while separate compact machines still need space for both. Choose based on the opening, doorway, and hookups you have, not on the word “compact” alone.
Before buying, compare the exact listed width with your narrowest measurement. Then check depth, height, door swing, and the space needed for connections in the product instructions. If any measurement is close, ask the seller or manufacturer to confirm the fit before arranging delivery.
- TAR Score9.6
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandHamilton Beach
- TAR Score9.6
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandEquator Advanced Appliances
- TAR Score9.0
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandSamsung
- TAR Score8.3
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandEquator Advanced Appliances
- TAR Score8.0
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandLG
Last update on 2026-11-10 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API
FAQs
Is a 27-inch opening enough for a 27-inch washer?
Not necessarily. A listed machine width and the usable opening need to account for the installation instructions, nearby walls, and any parts that stick into the space. If the numbers are equal, confirm the fit with the manufacturer or installer before ordering.
Should I measure the machine door as part of its width?
Use the width listed for the machine body, then check how far the door swings when open. A door that opens into a wall or blocks access can make a machine difficult to use even if the body fits the opening.
Can I push a washer tightly against the wall?
Don’t assume you can. The washer’s hoses and connections need room, and the manufacturer may call for space behind the machine. Follow the model’s installation instructions so the hoses aren’t crushed or sharply bent.
What if I’m not sure the machine will fit through the doorway?
Measure the doorway and the tightest turns along the route, then check the delivery and product information for the machine’s dimensions. If the route is close, ask the seller or delivery provider to confirm the requirements before delivery day.
Related guides: how wide is a stackable washer and dryer.


























