How Tall Is a Stackable Washer and Dryer?
Measure the floor-to-ceiling space where the machines will sit before you decide they’ll fit. A stacked washer and dryer is often about 6 to 7 feet tall, but that estimate isn’t enough to rule out a low shelf or ceiling.
The exact height depends on the washer and dryer, or on whether they’re built together as one tall laundry center. Parts that hold the dryer on top, a raised base, and the machines’ feet can add height. You’ll also need open space above for installation and everyday use. Here’s how to measure your spot and confirm the height for the setup you’re considering.
Why does the height vary?
Separate washers and dryers can be stacked to make one tall setup, but there is no single height that fits every pair. The height depends on the washer and dryer models, how the dryer sits on the washer, and whether extra parts or a raised base are included.
A stack may fit beneath a ceiling but still collide with a shelf, cabinet, or low beam. Measure the space where the machines will actually stand, including the lowest overhead obstruction, rather than relying on a general estimate.
Use the manufacturer’s listed height for the complete stacked setup when you can find it. If the manufacturer lists the washer and dryer heights separately, don’t simply add them together: the dryer sits on the washer, and the stacking parts and setup instructions can affect the final measurement.
Leave room for the setup instructions’ stated open space above the machine. The dryer door, controls, and other parts you need to reach must also remain easy to use. The amount of space needed can differ by model, so don’t assume a tight gap is acceptable just because the machine clears the ceiling.
Is a laundry center the same height?
No, a laundry center and separate stacked machines are different kinds of setups. A laundry center is a washer and dryer built together as one tall unit. Separate machines are two individual appliances, with the dryer placed above the washer using parts made for that pair.
Both styles save floor space, but their listed dimensions can differ. Check the height for the exact laundry center or the exact washer-and-dryer combination you plan to use. A height listed for one style won’t tell you whether another style fits.
With separate machines, confirm that the manufacturer allows those models to be stacked together and specifies the correct parts. Don’t assume that any dryer can safely sit on any washer, even if the two machines look similar. The manufacturer’s instructions identify which combinations and parts are meant to work together.
A laundry center’s listed height is usually for the assembled unit, but check what that measurement includes. The product page or manual should make clear whether the measurement includes the feet or any other parts that affect its height.
How do I measure the space?
Measure from the floor to the lowest point above the planned location. If the ceiling is higher but a shelf hangs over the machines, the shelf is the limit. A few careful measurements now can prevent a setup that fits on the floor but gets stuck under the shelf.
- Clear the spot. Move baskets, loose items, or anything else that blocks access to the floor and the area overhead. Measure where the machines will actually sit, not a nearby open part of the room.
- Check the floor-to-ceiling height. Hold a tape measure straight up from the floor to the ceiling. Keep the tape vertical, and note the measurement.
- Check beneath shelves and cabinets. Measure from the floor to the underside of the lowest shelf, cabinet, pipe, or beam above the machines. If the obstruction hangs over only part of the space, measure its position as well.
- Measure more than one spot. Floors and ceilings may not be perfectly level. Check the height at the front and back of the planned space, and use the smallest measurement when comparing it with the machine’s height.
- Write down the usable height. Keep the smallest floor-to-obstruction measurement. Compare it with the manufacturer’s listed height for the complete setup, then account for any extra open space the instructions require.
For example, a tape measure may show more room at the front than under a cabinet near the back. The lower measurement is what matters if the stacked setup will extend beneath that cabinet. Don’t use the taller measurement just because it makes the fit appear easier.
Check whether the floor is level and whether the machine will sit on a raised platform. A base can lift the whole setup, while uneven flooring may affect how the machine sits. Don’t guess how much either will change the final height. Confirm the setup details in the manufacturer’s instructions.
Also think about how you’ll use the dryer after installation. A machine can fit without touching the shelf and still leave too little room to open the door comfortably or reach the controls. Follow the manufacturer’s guidance for open space around and above the machine, especially if a shelf is close overhead.
What parts can add height?
Compare the height of the complete installed setup with your measurement, not just the bare washer or dryer. Check each item below in the product information or manual:
- The stacking kit: These are the parts that hold the dryer on top of the washer. Confirm the listed height for the pair with the correct kit in place.
- A raised base: A platform or other base beneath the washer lifts the entire stack. Verify whether the listed setup height includes it.
- The feet: The feet under a machine can affect its installed height. Look for dimensions that include the feet, rather than assuming a measurement covers them.
- Required open space: The instructions may call for extra room above or around the machines. This is separate from the appliance’s height, so check the installation instructions as well as the dimensions.
- Closet or cabinet limits: Shelves, doors, trim, and ceiling slopes can reduce the space available. Measure to the closest obstruction, not just the main ceiling.
Be careful with measurements that don’t say what they include. A listed height may describe one machine, a pair, or a particular setup. If the page gives separate heights but doesn’t explain whether a stacking kit or base is included, look in the manual or ask the manufacturer before ordering.
What if the height isn’t clear?
Pause before buying if you can’t match the listed measurement to the exact setup. A small difference can matter when a machine has to slide beneath a low shelf. Ask the manufacturer or installer to confirm the complete installed height and the required space above it.
- Give them the exact washer and dryer models, or the exact laundry center model.
- Ask whether the height includes the feet and the stacking kit, if the setup uses one.
- Ask whether a raised base changes the total height.
- Ask how much open space must remain above the machine for installation and use.
- Share the smallest floor-to-shelf or floor-to-ceiling measurement from your space.
If a professional is handling installation, ask them to confirm the fit before the machines are moved into a tight closet. Don’t force a machine beneath a shelf or remove a required part to make it fit. If the manufacturer’s instructions and the available space don’t line up, get guidance from the manufacturer or installer before proceeding.
Once you have the exact setup height and required open space, compare those figures with your smallest measurement. The space needs to accommodate both the machine and any extra clearance the instructions call for. If it doesn’t, consider a different setup or adjust the shelf before delivery.
FAQs
Can I add the washer and dryer heights together?
Not reliably. The dryer sits on the washer, and the stacking parts or other setup details may affect the final measurement. Use the manufacturer’s height for the complete stacked pair whenever it’s available.
Should I measure before or after installing a shelf?
Measure the space as it will be after installation. If the shelf is already there, measure from the floor to its underside. If you plan to add one, include its final position when checking whether the machines will fit.
Do I need space above the dryer?
You may need open space above the machine for installation or use. The amount depends on the model, so check the manual instead of assuming that a gap of any particular size will work. Include that space when comparing the setup with a low ceiling or shelf.
What should I do if the machine fits only with no extra room?
Don’t assume that a close fit is acceptable. Check the installation instructions for required open space, and ask the manufacturer or installer if the guidance is unclear. A machine that clears the shelf but lacks required space may not be suitable for that location.
Related guides: how tall are stackable washer and dryers and how much is a stackable washer and dryer.





















