Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Tall Are Stackable Washers and Dryers? What to Measure

Prime for Young Adults: check your eligibility on Amazon

There’s no need to guess at the height: stacked washers and dryers don’t have one standard height. The total depends on the exact machines and how they’re stacked, so check the manufacturer’s listed height for the full setup before deciding it will fit.

Separate washer and dryer units may need a stacking part, while a single laundry center is built as one unit. The machines, stacking part, and space needed above or around them can all affect the fit. Hoses, vents, and uneven floors can also take up room. Start by finding the complete installed height, then compare it with the tightest point under your shelf or ceiling.

Why stacked washer and dryer heights vary

There isn’t one height that fits every stacked washer and dryer. The total depends on the height of both appliances, how they connect, and the room they need for installation. A pair that looks compact in a picture can still be too tall for a shelf or closet opening.

Some setups use two separate machines, with a dryer placed above a washer. Others are built as one laundry center, with the washer and dryer joined in a single unit. Those designs can have different overall heights, so don’t use the dimensions of one style to estimate the other.

With separate machines, the stacking parts matter too. A stacking kit is the piece that secures the dryer above the washer. The listed height may describe the appliances without that part, so check whether the manufacturer’s height includes the kit and whether the kit adds to the total.

Clearance can change what fits, even if the appliances’ listed height is below the ceiling or shelf. The manufacturer may call for open space above or around the machines. Hoses, a dryer vent, a raised floor, or a shelf that slopes down can also take up room or restrict access.

For a tight laundry closet, the useful number is the height of the fully installed setup, not just the height of either appliance. If the manufacturer does not give that combined figure, ask the manufacturer or installer to confirm it before you buy.

Find the height of the exact stacked setup

Use the dimensions for the exact washer and dryer you plan to install together. A washer’s height alone, or a dryer’s height alone, won’t tell you how tall the finished stack will be. Follow these steps before ordering.

  1. Find each appliance’s listed height. Look on the manufacturer’s product page or in the installation instructions. Make sure you’re reading height, not width or depth, and confirm that the information applies to the exact model.
  2. Check that the pair can be stacked. The fact that two machines are sold separately doesn’t mean they can safely be stacked together. Confirm that the manufacturer allows the exact washer and dryer to be paired.
  3. Look up the required stacking parts. For a separate pair, check which stacking kit the manufacturer requires. Don’t assume a kit is included or that a different kit will fit.
  4. Confirm the complete installed height. Check whether the listed overall height includes the stacking parts. If it doesn’t, look for the added height in the kit instructions or ask the manufacturer for the finished height.
  5. Read the installation instructions for extra space. Check for required clearance above and around the setup, and note whether the listed height assumes a level floor. Ask the manufacturer or installer if the instructions don’t make the final space needs clear.

Keep the answers together in one place: appliance height, stacking kit, installed height, and required clearance. That makes it easier to compare the setup with your closet instead of trying to piece together numbers while shopping.

Don’t add two listed heights and assume that result is the final installed height. That may miss the stacking parts, required gaps, or other details in the installation instructions. If the manufacturer doesn’t clearly state whether a measurement includes those parts, get confirmation rather than guessing.

Measure the opening and check clearances

Measure the space before you order, and use the lowest available height as your limit. A closet ceiling may be slightly uneven, or a shelf may dip near one end. The tallest point won’t help if the appliances have to pass beneath a lower one.

  1. Clear the area. Move stored items out of the way so you can see the ceiling, shelf, floor, and any trim or pipes that could affect the opening.
  2. Measure from the floor to the obstruction. Hold a tape measure vertically from the floor where the machines will sit to the underside of the shelf or ceiling. Repeat the measurement at several spots across the opening, including the front and back.
  3. Use the smallest measurement. Write down the lowest reading. If the floor slopes or the shelf is uneven, the tightest point is the one that determines whether the stack can fit.
  4. Compare like with like. Compare that opening with the complete installed height, then account for the clearance required by the manufacturer. Don’t treat required open space as extra room you can ignore.
  5. Check access and connections. Look for hoses, the dryer vent, shutoff valves, and nearby doors or shelves. Confirm that there will be room to make connections and reach them later, as the installation instructions require.

A tape measure can show that a stack is shorter than the opening, but that alone doesn’t prove the setup will fit properly. The appliances may need room above them for installation or around them for connections. A tight fit can also make it hard to reach a valve or move a machine for service.

Before buying, confirm:

  • The finished height includes the correct stacking parts, if needed.
  • The manufacturer’s required clearance fits within your measured space.
  • Hoses and the dryer vent have room without being crushed or sharply bent.
  • The floor and opening leave enough access for installation and future service.

If your available height is lower than the installed height plus required clearance, don’t force the setup into the opening. Ask the manufacturer or a qualified installer whether another approved arrangement will fit. If a shelf needs to be removed or changed, get permission from your landlord first if you rent.

Stop and ask an installer for help if you can’t tell whether the vent or hoses will fit safely, or if the opening leaves no room to connect the machines. Don’t push a dryer into place against a vent or squeeze a hose behind an appliance just to make the door close.

Choose between a laundry center and separate stacked machines

A laundry center is one joined unit with a washer below and a dryer above. A separate stacked pair is made of two appliances secured together. Neither style is automatically shorter, so compare the listed overall height for each exact setup rather than relying on the name or appearance.

A laundry center may make the height easier to find because the manufacturer can list the overall size of the complete unit. Still, check the installation instructions for clearance and connections. Don’t assume the listed height accounts for every space needed around the unit.

With separate machines, you need to confirm that the washer, dryer, and stacking kit are a compatible combination. The completed height and installation needs depend on those exact parts. If you’re comparing options for a tight closet, request the complete installed height for each one.

Once the height works, check that the setup also suits the space you have for delivery and installation. A stack that fits beneath a shelf may still be difficult to bring through a doorway or position in a narrow closet. For help weighing broader washer considerations, see this guide to what to consider when choosing a reliable washing machine.

FAQs

Does the listed height include the stacking parts?

It depends on the manufacturer and the measurement being shown. Check the product page and installation instructions for the exact pair and stacking kit. If they don’t say whether the kit is included, ask the manufacturer to confirm the finished height.

How much space should I leave above the dryer?

There isn’t one clearance amount that applies to every setup. Follow the manufacturer’s installation instructions for the exact machines, including any required space above them. A dryer that fits under a shelf without that space may still be too cramped to install or use as directed.

Are a laundry center and separate stacked pair the same height?

No. Their heights vary by model and design, so one style can’t stand in for the other when you measure. Compare the listed overall height and installation requirements for the exact laundry center or complete stacked pair you’re considering.

Related guides: best stackable washers and dryers and how tall is a stackable washer and dryer.

4
2 ratings
Elvin Elliston
WRITTEN BY
Elvin Elliston
Elvin Elliston - Elvin is a home appliances expert who specializes in smart home integration. Based in Silicon Valley, California, Michael has been in the field for over 15 years, providing insightful reviews on the latest smart home appliances.