Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Often Should You Clean Your Washing Machine?

Prime for Young Adults: check your eligibility on Amazon

Set a monthly reminder to clean the washer drum. A regular cleaning helps clear detergent residue and damp smells before they build up, but follow your manual if it gives a different schedule or method.

Wipe the door or lid and detergent drawer often, especially after loads that leave them wet or sticky. Daily laundry, lingering musty smells, and visible residue may mean the washer needs attention sooner. Your washer’s design and cleaning cycle also matter, so start with the simple routine and adjust it to what you notice and what the manual says.

Why a Monthly Drum Cleaning Helps

A washer can look clean while detergent, lint, and damp soil collect inside the drum and around its edges. Regular cleaning helps clear that buildup before it leaves a musty smell on clothes or transfers residue to a fresh load.

Run the washer’s drum-cleaning cycle about once a month if its manual recommends that schedule. If the manual gives a different interval or cleaning method, follow it instead. Washers vary, so a method that suits one machine may not suit another.

The drum-cleaning cycle runs the washer without laundry and is meant to rinse away residue from the inside. Some machines have a cycle with that name; others may use a different label or give separate care instructions. Check the control panel and manual rather than guessing which cycle is intended for cleaning.

A monthly reminder is a practical starting point, not a reason to ignore signs of buildup. If clothes come out smelling stale, you see residue inside the drum, or the washer has a lingering odor, clean it sooner using the method allowed by the manual. If the smell returns quickly after cleaning, look at your between-load habits and the machine’s care instructions.

A cleaning cycle is not a substitute for wiping areas where moisture and detergent can sit. The door or lid, the rubber edge around a front-loading door, and the detergent drawer may stay damp after a wash. A quick wipe and some air circulation between loads can help keep those spots from becoming the source of an odor.

What to Wipe Between Drum Cleanings

You don’t need to scrub the whole washer after every load. Focus on the places that stay wet or collect splashes, and wipe them when you notice water or soap left behind. A soft cloth is usually enough for routine care, but follow the manual if it names a specific cleaning tool or cleaner.

  • Door or lid: Wipe away water and detergent splashes, especially along the inside edge. For a front-loading washer, gently wipe the rubber seal around the opening, including the folds where water can sit.
  • Detergent drawer: Look for pooled liquid or sticky residue. If the drawer is removable, take it out only as the manual directs, rinse it if allowed, and dry it before putting it back.
  • Drum opening: Check for lint, hair, or visible soap film and wipe it away. If pet hair is a regular issue, follow the steps for cleaning pet hair out of a washer.
  • Airflow: After unloading, leave the door or lid open when it is safe to do so. This gives the inside a chance to dry instead of trapping damp air.

Keep the door or lid open only when children and pets cannot climb into the washer or get trapped. If the washer is in a narrow walkway, leave it open only while you can keep the area clear, then close it when needed. Don’t force a locked door or lid; wait for the lock to release as the manual describes.

Rinse and dry a detergent drawer only if its care instructions allow it. Some drawers have removable pieces that need to be put back in the right place. If a dispenser is leaving softener behind, the issue may involve residue or the dispenser’s setup; see why fabric softener may not dispense during a cycle.

When Your Laundry Habits Call for More Frequent Care

How often you use the washer affects how quickly residue and dampness can build up. A household that runs loads most days may need to pay closer attention than someone who washes once or twice a week. Keep the monthly drum cleaning as your starting point, then adjust if odor or residue appears sooner.

If you wash daily, notice whether damp clothes sit in the drum after a cycle or whether the door stays closed between loads. Those habits can leave moisture trapped inside. Unload promptly when you can, wipe away visible water, and leave the door or lid open to air out between loads.

If a musty smell appears, clean the drum using the manual-approved method rather than masking the odor with extra detergent or fragrance. Check the door seal, drawer, and drum opening for damp residue. If clothes still smell stale after cleaning, or the odor comes back soon, review the manual’s care steps and consider whether a hidden area needs attention.

Visible detergent film is another sign to check your routine. Use the detergent amount and type named in the washer’s instructions, since too much soap can leave residue behind. If you see suds or sticky film after a wash, don’t add more cleaner to the next load; first check the detergent directions and the washer manual.

Front-loading washers have a door seal with folds that can hold water, so wipe those folds gently and look for trapped lint. Top-loading washers don’t have that same front-door seal, but water and residue can still collect around the lid and inside the drum. Neither style has one universal cleaning method, so use the care instructions for your exact washer.

Washer designs also differ in their cleaning cycles and dispensers. Some provide a cycle intended for drum care, while others give a different procedure. If the control panel label is unclear, check the manual or the manufacturer’s instructions before choosing a cycle or adding a cleaner.

Run a Cleaning Cycle Safely and Avoid the Wrong Cleaner

Before starting, check the manual for the correct cycle, whether the drum must be empty, and whether the washer allows a cleaning product. Use only a cleaner the manufacturer permits, in the amount and location the instructions specify. If the manual calls for an empty drum, remove all laundry, including a small item left behind.

  1. Read the care instructions. Find the washer’s cleaning-cycle directions and note the permitted cleaner, if any. If you can’t confirm which product or cycle is allowed, don’t guess; contact the manufacturer or use the manual’s stated care method.
  2. Prepare the washer. Remove clothing and loose items from the drum. Check the door seal or lid area for lint and wipe away visible residue with a soft cloth.
  3. Add only the approved cleaner, if required. Follow the manual’s directions for where it goes. Don’t combine cleaners or add extra detergent unless the instructions specifically call for it.
  4. Select the cleaning cycle. Use the named cycle if your washer has one. If it doesn’t, follow the exact alternative given in the manual rather than choosing a cycle based on its name alone.
  5. Let the cycle finish, then air out the washer. Wipe away any water left around the opening and leave the door or lid open when the area is safe. Check the drum for remaining film or odor before putting laundry back in.

Avoid mixing household cleaners, especially bleach with ammonia or products containing acids. Combining cleaners can create dangerous fumes. If you accidentally mix products and notice fumes or feel unwell, move to fresh air and contact emergency services or poison control for guidance.

Don’t pour vinegar, bleach, or another household cleaner into the washer unless the manual says that specific product and method are safe. A familiar kitchen cleaner is not automatically safe for washer parts. Avoid abrasive pads and sharp tools, which can scratch surfaces or damage the door seal.

Don’t use an extra-hot setting or a longer cycle as a substitute for the washer’s care directions. If you can’t find the manual, look up the instructions using the washer’s make and model from its label, or contact the manufacturer. Stop and seek qualified service if cleaning is followed by leaking, unusual noises, a burning smell, or a cycle that won’t complete.

FAQs

Do I need to wipe the washer after every load?

No. Wipe visible water or detergent from the door, lid, seal, and drawer when you see it, and leave the washer open to dry when it’s safe. A quick check matters more than scrubbing the entire machine each time.

Should I clean the washer more often if it smells musty?

Yes, clean it sooner using the method in the manual, and check for damp residue around the seal, lid, and detergent drawer. If the smell remains or returns soon, consult the manual or contact the manufacturer rather than using a stronger cleaner without approval.

Can I use the washer’s cleaning cycle with laundry inside?

Usually, the cleaning cycle is meant to run without laundry, but the washer’s instructions take priority. Check the manual before starting and remove clothing if it says the drum must be empty.

Related guides: things you can clean in washing machine.

5
2 ratings
James Patterson
WRITTEN BY
James Patterson
Hi, I'm James, a home appliance nerd hailing from New York City. Armed with my trusty Electrical Engineering degree from MIT and 10 years of experience, I've been helping people navigate the wild world of smart home tech.