Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Often Should You Clean the Drain Pump Filter?

Prime for Young Adults: check your eligibility on Amazon

Clean the drain pump filter every few months if your washer’s manual doesn’t give a schedule. The manual comes first because the cleaning interval and filter access differ from one washer to another.

Frequent loads or lint, hair, coins, and other debris can mean the filter needs attention sooner. Slow draining, water left in the drum, or a drainage warning are signs to check it rather than wait. Before opening the filter, find the model’s instructions so you know where it is and how to catch any trapped water. Here’s how to do that without turning a small cleaning job into a puddle.

The Short Version

  • Follow your washer’s manual first. The cleaning schedule and filter location depend on the model, and some washers do not have a filter that owners can open.
  • If the manual gives no schedule, check the filter every few months as a starting point. Clean it sooner if you notice slow draining, water left in the basket, or a drainage warning.
  • Prepare for trapped water before opening the filter. Unplug the washer if the manual directs you to, and use a shallow container and towels to catch spills.
  • If the filter is clean but the washer still drains poorly, stop repeating the cleaning and check the manual’s other troubleshooting steps or contact a repair professional.

Why the Cleaning Schedule Depends on Your Washer

The drain pump filter is a small screen or trap that catches debris before water drains out of the washer. Lint, hair, coins, and other small objects can collect there, much like bits of food gathering in a sink strainer. If enough debris builds up, water may take longer to leave the washer or remain in the basket after a cycle.

There is no single schedule that fits every washing machine. The maker may give a specific cleaning interval, or the manual may explain that the filter needs attention only when drainage problems appear. The filter may also be in a different place, or not designed for owners to open at all.

Check the manual for your exact model before removing any cover or turning a filter cap. Look under headings such as “cleaning,” “drain pump,” “filter,” or “troubleshooting.” If you do not have the paper manual, search the manufacturer’s website using the model name or number from the washer’s label.

If the manual does not give a schedule, checking every few months is a reasonable place to start. That does not mean you must open the filter on a fixed date if the manual says otherwise. Treat the interval as a reminder to look for signs of buildup, then clean only as the washer’s instructions allow.

Your laundry habits can change how soon the filter needs attention. Loads with linty items, pet hair, or clothes that carry dirt and small debris may leave more behind than lightly worn clothes. A washer used often may also need more frequent checks than one used only now and then. Let the manual and the washer’s behavior guide the timing.

Signs the Filter May Need Attention Sooner

Check the filter sooner than your usual schedule if the washer starts acting differently during draining. These signs do not prove the filter is the cause, but they are a good reason to consult the manual and inspect the parts you can safely reach.

  • Water drains more slowly than usual. The washer may pause for a long time before moving to the next part of the cycle.
  • Water remains in the basket. A small amount may be normal on some machines or cycles, so compare what you see with the manual. A noticeable change from the washer’s usual behavior deserves attention.
  • A drainage warning appears. This may be a message or light saying that the washer cannot drain properly. Check the manual to learn what that warning means for your model.
  • You hear a change while the washer drains. Unusual sounds can have several causes. Don’t reach into the washer or remove a panel to investigate while it is running.
  • You find lint, hair, or small objects near the drain area. If the manual shows that the filter is user-cleanable, inspect it using the steps below.

A drainage problem can also come from a kinked or blocked drain hose, or from another issue inside the washer. Do not assume that every warning means the filter is clogged. Check the manual’s troubleshooting instructions before moving the washer, disconnecting hoses, or opening parts.

Find the Filter and Prepare for Trapped Water

The drain pump filter may be behind a small cover near the bottom of the washer, but that is not true for every model. Some washers have a filter that owners can remove, while others use a different design or require service. The manual is the safest way to identify the correct part and access method.

  1. Stop the washer. If it is running, use the controls to stop it and wait until moving parts have stopped. Follow the manual about unplugging the washer or turning off power before cleaning.
  2. Check for hot water. If the washer has just run a hot cycle, give it time to cool. Follow the manual’s warning about water temperature before opening anything.
  3. Read the filter instructions. Confirm whether your model has an owner-accessible pump filter and where it is. Do not pry off a panel, remove screws, or turn an unfamiliar cap based on a picture of another washer.
  4. Prepare to catch water. Put towels on the floor and set a shallow, wide container below the filter area. Trapped water can come out quickly once the cap or drain hose is opened, even if the washer looks empty.
  5. Look for a small drain hose. Some models have a separate hose used to release leftover water before the filter is opened. Use it only as the manual describes, and direct the water into your container.

Make sure the container can fit beneath the opening and is easy to empty. If the manual says to drain water in small amounts, follow that direction and empty the container as needed. Don’t open the filter over bare flooring and hope only a few drops will escape.

Clean the Filter Safely, Following the Manual

Use the steps for your own washer because the cap, drain hose, and cleaning method vary. If the manual does not explain how to remove the filter, do not force it. A stuck cap or an unfamiliar part is a reason to pause and ask the manufacturer or a repair professional for guidance.

  1. Release the trapped water as directed. If your washer has a small drain hose, remove its cap or position it as shown in the manual, then empty the water into the container. Keep towels close in case water runs around the container.
  2. Open the filter slowly. Turn or remove the cap only in the direction and manner shown for your model. Go slowly so you can catch water and stop if the cap resists or the flow becomes difficult to manage.
  3. Remove visible debris. Take out lint, hair, coins, or other objects you can reach without forcing or damaging the filter. Use the manual’s cleaning instructions, including any direction about rinsing.
  4. Check the filter and opening. Look for debris around the filter and for any damage you can see. Do not push tools, fingers, or objects deep into the opening.
  5. Put the parts back as instructed. Refit the filter cap and any drain hose cap securely. A loose or poorly seated cap can let water escape when the washer drains.
  6. Check the floor and washer area. Wipe up spilled water before reconnecting power or running the washer. If you are unsure whether the parts are seated correctly, do not run a cycle until you have checked the manual or asked for help.

Never remove a filter while the washer is running or force a panel or cap that will not turn. Do not assume the washer is empty just because the cycle ended; water can remain inside the pump and filter area. Keep children and pets away from the open filter and any spilled water while you work.

After cleaning, follow the manual’s directions for checking the washer. If it calls for a drain cycle or another check, use that exact procedure and watch for leaks from the filter area. If water appears around the cap, stop the washer and review how the filter was refitted before running it again.

If Cleaning Does Not Fix the Drainage Problem

If the washer still drains slowly or leaves water behind after the filter is clean and correctly reinstalled, do not keep opening it without a reason. Check the manual for other simple causes, such as a drain hose that is kinked or positioned incorrectly. Follow its instructions before touching any hose or moving the washer.

Some washers do not have a pump filter that owners can open. If the manual does not show one, do not remove panels or search inside the machine for a hidden trap. Use the washer’s listed care and troubleshooting steps, then contact the manufacturer or a qualified repair professional if the drainage warning or standing water continues.

Get help if you see a leak, cannot close the filter securely, or cannot safely reach the filter area. Stop using the washer if water is leaking near electrical parts, and do not touch wet plugs or outlets. For a separate issue with residue inside the clothes basket, follow the manual’s care instructions or see guidance on cleaning washer drum residue; drum cleaning does not replace pump-filter care.

FAQs

Where is the drain pump filter on a washing machine?

The filter location depends on the washer model. It may sit behind a small lower cover, but some washers do not have an owner-accessible filter. Use your manual to identify the correct cover and opening before removing anything.

Should I clean the filter if the washer drains normally?

Follow the manual’s schedule, even if the washer seems to drain well. If it gives no schedule, check the filter every few months as a starting point, provided the filter is designed for owner cleaning. You may need to check sooner if loads leave more lint or debris behind.

Can I clean the filter without unplugging the washer?

Follow the manual’s safety instructions for your model. If it says to unplug the washer, do so before opening the filter. Never handle a plug or outlet with wet hands or while standing in spilled water.

What if I clean the filter and a drainage warning returns?

Check the manual’s other drainage steps, including whether it asks you to inspect the drain hose. If water remains in the washer or the warning returns, contact the manufacturer or a qualified repair professional. The filter may not be the cause, and opening other parts can create a leak or damage the washer.

Related guides: how often should you clean your washing machine and how often to clean washing machine.

4
1 ratings
Mildred Xiong
WRITTEN BY
Mildred Xiong
Mildred Xiong is a passionate home appliances editor with over 10 years of experience. She is known for her in-depth reviews and guides on everything from refrigerators to vacuum cleaners.