Why Does the Washing Machine Tear or Damage Clothes?
Pause the next load and check the washer’s inside tub for a rough spot or trapped item that could catch fabric. Clothes can be torn by sharp edges, items snagging one another, an overloaded load, or a wash or spin setting that’s too harsh; the damage pattern can help point to the cause.
Small snags in one area may suggest something is catching, while damage limited to certain garments can come from zippers, hooks, underwires, or weak seams. A packed load or fast spin can also put extra strain on delicate fabric, and a washer with a center post that moves clothes handles a load differently from one with smooth sides. Start with the washer and load checks below to narrow down what’s happening.
Match the damage pattern to the likely cause
A small hole, a pulled thread, and a torn seam can point to different problems. Look closely at the damaged area and note which clothes were affected, where they sat in the load, and which wash settings you used. One damaged item may have a weak seam or a sharp detail; damage across several loads makes a snagging spot inside the washer more likely.
A snag often looks like a thread pulled out of the fabric, sometimes with a small hole nearby. A rough edge or sharp object inside the washer can catch a garment as the load moves. Check for damage around the drum openings, along the rim, and near the agitator, the post in the middle that moves clothes.
Several small holes in thin clothes may mean fabric is rubbing against rough surfaces or getting trapped and pulled during the wash. A torn seam or stretched area can happen when garments twist together, a load is packed too tightly, or the cycle is rough for the fabric. Delicate knits and worn clothes may be more likely to show damage than sturdy items.
Pay attention to whether the same garment, fabric type, or load arrangement is involved each time. If only clothes with zippers, hooks, or underwires are damaged, those parts may be catching other items. If unrelated clothes come out snagged from different loads, inspect the washer before running more laundry.
Unplug the washer before checking for snags
Turn the washer off and unplug it before putting your hands inside. If you cannot reach the plug safely, or water is near the outlet or cord, do not touch them. Stop and ask a qualified repair professional for help.
Take the clothes out and check each damaged item in good light. Look for a loose thread, broken seam, open zipper, hook, or bent underwire. These details can catch other fabric, even when they seem small.
- Look over the inside of the washer. Use a flashlight to inspect the stainless steel clothes tub or inner wash basket, including the holes, seams, and rim. In a top-load washer, look around the center agitator post or the flat bottom wash plate, the part that moves clothes using water currents.
- Feel for rough spots only when the washer is unplugged. Move your fingertips gently over accessible surfaces and openings. Stop if you feel a burr, sharp edge, or raised piece. Do not scrape your hand along the metal or reach into a narrow gap.
- Check for trapped items. Look around the door seal on a front-load washer and around the rim and agitator on a top-load washer. A small object, such as a wire from a bra, can hide in a gap. Do not pull or bend a part you cannot reach easily.
- Check the clothes and any laundry bag. Look for exposed hooks, open zippers, loose decorative parts, or a torn mesh bag. A damaged bag can let small items escape or leave rough edges exposed.
- Close the washer and inspect the next load carefully. If you found a sharp spot or trapped object, do not run another load. If you found nothing and the washer looks undamaged, try a small load of sturdy clothes on a gentle cycle and see whether the problem returns.
Do not use a knife, screwdriver, or other sharp tool to search inside the washer. Do not remove panels or reach behind the drum. Those steps can expose electrical parts or create a water leak, and they are better left to a repair professional.
Compare the load, garment details, and wash settings
A washer can damage clothes even when nothing inside it is sharp. A load that is too full leaves little room for garments to move freely. Clothes can twist around one another, and seams or straps may take the strain during washing and spinning.
For the next load, leave enough room for clothes to move rather than pressing them down to make more fit. Follow the washer’s manual for its load guidance. Bulky items can take up more space than their weight suggests, so a blanket or a few thick towels may crowd the tub even when the load does not seem heavy.
Garment details matter, too. Fasten zippers and hooks, tie loose drawstrings, and close hook-and-loop fasteners before washing. Turn clothes with decorations or delicate surfaces inside out. Put bras, hosiery, and other easily snagged items in a sound, closed laundry bag; remove underwires or repair a bra if a wire has started to come out.
The setting should match the fabric. A heavy-duty cycle moves clothes more forcefully than a delicate or gentle cycle, so it can be hard on thin knits, lace, or worn fabric. A fast spin can also put more strain on garments as they press against the tub. Choose a gentler wash and spin setting when the care label calls for it, and use the washer manual to confirm which settings change wash or spin action.
The washer style can help narrow down where to look, but it does not prove the cause. In a top-load washer with an agitator, check whether clothes are winding around the center post or catching near its base. In a washer with a smooth-sided drum, inspect the drum holes, rim, and door seal for rough edges or trapped items. Either style can damage clothes if a load is crowded or garments catch on one another.
Change these habits to reduce fabric damage
- Sort delicate, worn, or loosely woven clothes away from heavy items with zippers and rough fasteners.
- Fasten zippers and hooks, tie drawstrings, and turn delicate or decorated garments inside out.
- Use a closed laundry bag for small or easily snagged items, and replace the bag if its mesh or zipper is damaged.
- Leave room for clothes to move, and wash bulky items separately when they crowd the tub.
- Choose a delicate or gentle cycle and a lower spin setting for fabrics that need gentler handling.
- Read the garment care label and follow the washer manual if a cycle’s strength is unclear.
- Check pockets before washing so coins, keys, and other small objects do not get loose in the tub.
After changing the load or setting, look over every item as you unload it. If the clothes come out without new snags, repeat the same arrangement for similar items. If new damage appears, note which garments and washer area were involved before changing several things at once.
Stop using the washer if damage keeps returning
Stop running loads if you find a sharp or rough spot, a loose part, or an object trapped where you cannot safely reach it. A snagging edge can damage more clothes, and a loose part may need repair. Contact the washer’s manufacturer or a qualified repair professional, especially if the problem is inside the tub or behind a panel.
Arrange service if unrelated clothes keep coming out with new holes or snags after you have reduced the load, secured garment fasteners, and chosen a gentler setting. Repeated damage can point to a hidden rough spot, a damaged door seal, or another part that needs attention. Tell the repair professional where the damage appears and whether it happens with every load or only certain items.
Stop and seek help promptly if you see exposed wires, smell burning, notice water near electrical parts, or hear a new scraping sound. Do not reach into the washer or remove its panels to find the source. If the washer is under warranty, check the manual or contact the manufacturer before arranging repairs.
FAQs
Can one wash make a hole in a shirt?
Yes. A sharp object, rough spot, open zipper, or hook can catch fabric during one load. A worn or weak area may also tear when clothes twist or rub together.
Why do clothes get holes even when the washer looks smooth?
A snagging spot may be hard to see, or the damage may come from garments rubbing against one another. Check the rim, drum openings, door seal, and any parts near the agitator, then consider load size and garment fasteners.
Can detergent cause clothes to tear?
Detergent is not a usual direct cause of a tear or snag. If fabric feels weakened or shows wear, review the garment care label and use the detergent amount and wash setting recommended for the washer and load.
How can I tell whether the washer or a garment caused the damage?
If one item with a worn seam or exposed hook is affected, the garment may be the source. If different clothes develop similar damage across several loads, inspect the washer and change the load and settings; recurring damage calls for repair help.
Related guides: best washing machine that doesnt damage clothes and why is washer banging when spinning clothes.





















