Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

What Is an Impeller Washing Machine? How It Moves Clothes

Prime for Young Adults: check your eligibility on Amazon

Check the washer’s drum for a low plate or small fins at the bottom. That part is the impeller: it moves water and laundry around without the tall center post found in some washers.

How well this design suits your laundry depends on the washer’s loading instructions, how much room your clothes have to move, and what you’re washing. A crowded drum can limit that movement, and bulky items may need special instructions. The next step is to see how this bottom-mounted part moves clothes and what that means for loading.

What does an impeller look like?

An impeller is a low, flat piece at the bottom of a washer’s inner tub. It may look like a smooth plate, or it may have raised fins that stick up from the surface. The exact shape depends on the washer.

Look inside the drum, the tub that holds your laundry. If there’s no tall post in the middle and you see a plate or fins near the bottom, the washer uses an impeller. The plate may be partly hidden under clothes or water, so check the manual or the washer’s product description if you’re unsure.

An agitator washer has a tall center post instead. The post rises from the bottom and may have fins or ridges along its sides. It takes up space in the middle of the tub, while an impeller sits low and leaves the center more open.

How does an impeller move clothes?

The impeller turns or shifts the water and laundry at the bottom of the tub. That motion creates currents that carry clothes around the drum. The washer’s wash cycle repeats this movement to work water and detergent through the load.

Picture a few shirts moving around in a tub of water as the bottom plate turns. The clothes move with the water rather than being pulled around by a tall post. The washer still needs room for items to shift and move during the cycle.

An open center does not mean clothes can simply be packed in. A full drum can press garments together and limit how freely they move. If the items barely shift when the wash starts, the load may be too large or too tightly packed.

The washer’s instructions explain how to add laundry and which cycles to use. Follow those directions rather than assuming every impeller washer moves clothes in exactly the same way. Plate shape, wash motion, and loading guidance can differ from one model to another.

How is it different from an agitator washer?

An impeller washer uses a low plate or fins at the bottom of the tub to move laundry with water currents. An agitator washer uses a tall center post that twists clothes through the water. Both designs wash clothes, but they move the load in different ways.

The main difference you’ll notice when loading is the space in the middle. An impeller leaves that area open, while an agitator takes it up with its center post. That open space can make it easier to arrange some items, but it does not guarantee that every bulky load will fit or wash well.

Neither design has one loading rule that works for every machine. Check the washer’s manual for its load limit and directions. Also check garment care labels, especially for items that need a gentle cycle or should not go in a washing machine.

If you’re weighing other features while comparing washers, such as a cycle intended for hygiene-focused laundry, see this guide to washing machines with a sanitize cycle. That feature is separate from whether the washer has an impeller or a center-post agitator.

Can you wash bulky items in one?

Sometimes, but an open center does not mean every bulky item is a good fit. A blanket, comforter, or large towel can fill the tub, become heavy when wet, or bunch up during the wash. Those conditions can limit movement and may leave parts of the load less clean.

Before washing a bulky item, check its care label and the washer’s instructions. The manual may say which items the machine can handle and how to arrange them. If the item is too large for the tub or the manual rules it out, use a washer suited to that load instead.

When the instructions allow the item, make sure it has room to move. Don’t force it into the tub or pile other laundry on top just to fill the washer. A load that fits dry may take up more room once it gets wet and heavy.

If the washer pauses or makes a repeated thumping sound during a bulky load, stop and follow the manual’s directions. The item may have gathered on one side of the tub. Do not reach into a moving washer; wait until it stops and the lid can be opened safely before rearranging the load.

How should you load an impeller washer?

Start with the washer’s manual, since the loading method can vary by model. Use this checklist as a general guide, not a replacement for the instructions on your machine.

  1. Sort the laundry. Separate items that need different care or wash settings. Check garment labels for washing limits and choose a cycle that fits the load.
  2. Check pockets and untangle items. Remove loose objects and open up clothes that are twisted together. Tangled pieces can stay knotted as the load moves.
  3. Add items loosely. Spread the laundry around the tub instead of packing it into a tight bundle. Leave room for the load to shift, and follow any directions about where to place clothes.
  4. Keep the load within the manual’s limit. Don’t judge capacity just by whether the lid closes. If clothes are wedged in or have no space to move, take some out.
  5. Choose the right cycle and detergent. Use the cycle recommended for the items and the detergent amount stated in the washer’s instructions. More detergent is not automatically better.
  6. Check the load if it bunches. If the washer stops or the clothes collect on one side, pause it as directed. Once the washer is fully stopped, spread the load back out before continuing.

A load should not be packed so tightly that clothes cannot shift in the tub. But a very small or uneven load can also gather on one side. Follow the washer’s guidance on balancing the load instead of adding random items just to fill space.

Do not open a lid or reach into the tub while the washer is moving. If the machine has an automatic lid lock, wait for it to release. If you notice leaking, a burning smell, damaged wiring, or violent shaking that continues after you stop the cycle, stop using the washer and contact a qualified repair professional.

Is an impeller washer right for you?

This design may suit you if you want a washer without a tall post in the middle and you’re comfortable following the machine’s loading instructions. It can also suit your routine if your usual loads fit in the tub with room for items to move. The design alone does not tell you how a particular washer handles your clothes.

A center-post washer may be worth comparing if you’re used to seeing clothes move around the post and prefer that familiar layout. An impeller washer uses a different kind of movement, so avoid assuming that the same load size or loading habit will work equally well in both.

Before choosing, look for the impeller in the product description or inside the tub. Then check the washer’s instructions for load limits, bulky-item guidance, and cycle options that match your laundry. If you regularly wash large blankets, work clothes, or delicate garments, confirm that the machine’s directions cover those items.

Think about what happens on an ordinary laundry day. If you often stuff the tub full to get through a pile of clothes, you may need to change that habit with an impeller washer. If you can make smaller, loose loads and follow the listed directions, the design may fit your routine.

FAQs

Does an impeller washer have a center post?

No. An impeller is a low plate or set of fins at the bottom of the tub, not a tall post in the middle. Check the washer’s description or manual if the design is not clear from a picture.

Will an impeller washer tangle clothes?

Clothes can tangle in a washer if items twist together or the load is packed so tightly that it cannot move freely. Load items as the manual directs, and untangle clothes before adding them. The result can vary with the load and the washer’s design.

Can I wash a comforter in an impeller washer?

Only if the comforter’s care label and the washer’s manual allow it. Check whether the item fits with enough room to move once it is wet. If it crowds the tub or the manual excludes bulky bedding, don’t wash it in that machine.

Does an impeller wash the same way as an agitator?

No. An impeller moves clothes with water currents created by a low plate or fins. An agitator uses a tall center post to move clothes through the water. Both wash laundry, but their movement and loading instructions can differ.

4
1 ratings
Joanne Neal
WRITTEN BY
Joanne Neal
Joanne Neal, based in Miami, is a leading female expert in home appliances. Specializing in energy efficiency, she has 10 years of experience and a Master's degree in Environmental Science from the University of Florida.