Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

What Does Sanitary Mean on a Washing Machine?

Prime for Young Adults: check your eligibility on Amazon

Seeing a sanitary button on the control dial is nothing to worry about. This setting uses extra-hot water and an extended run time to eliminate household germs, pet dander, and dust mites. Most washers rely on a small built-in heater inside the drum to push water temperatures far above what a regular home water heater can deliver.

How you use this cycle depends on what is inside the tub. Sturdy cottons, towels, and cloth diapers handle the extreme heat well, but delicate synthetics, stretchy elastics, and wool will shrink or warp quickly. Heating water inside the drum also stretches the wash cycle past ninety minutes. Getting the best results comes down to knowing which fabrics can handle the heat and which need a gentler approach.

What does the sanitary cycle actually do?

The sanitary cycle uses sustained, extreme heat to destroy illness-causing germs and bacteria on your laundry. Regular wash cycles focus on loosening dirt and washing away body oils. A sanitary cycle takes things a step further by treating fabrics that need true biological cleaning.

Most modern washing machines reach these sanitizing levels with a small built-in heater inside the drum. Standard household tap water usually enters the machine at around 120 degrees Fahrenheit. The internal heating element takes over from there, driving water temperatures up between 140 and 165 degrees Fahrenheit, depending on your machine brand and settings.

Extreme heat is only half of the equation. The washer also holds that high temperature for an extended period, often twenty minutes or longer during the main wash phase. This prolonged heat soak breaks down protein-based grime and neutralizes dust mites and pet dander that trigger sneezing.

You do not need to press this button for ordinary daily laundry. It is designed for specific, high-risk loads: cloth diapers, bedding used during a stomach bug, soiled kitchen rags, pet blankets, or hospital scrubs. In those situations, a standard warm wash simply rinses the fabric, while the sanitary setting purges the microscopic contamination left behind.

How is sanitary different from a normal hot wash?

A standard hot wash relies entirely on the water coming from your home water heater. Most household water heaters are capped at 120 degrees to protect children and elderly family members from accidental scalding. That temperature works well for brightening whites, but it drops rapidly the moment water enters your laundry room.

As hot water flows through cold household pipes and enters a cool stainless steel clothes tub, it loses heat fast. By the time water starts mixing with your laundry, the temperature often falls to 105 or 110 degrees. That is warm enough to dissolve powdered detergent, but it does not stay hot enough long enough to kill resilient microbes.

The sanitary cycle solves this problem by taking control of the temperature inside the inner wash basket. Whether you are choosing between a top or front load washing machine, models with this feature do not depend on tap heat alone. The machine monitors the bath and turns on its own heating element to push the water past normal domestic limits.

A normal hot wash also begins cooling down the second the fill valve shuts off. As the cycle agitates, the room air and cold metal soak up the heat. A sanitary cycle continuously powers the heating element to keep the water steaming hot throughout the entire wash portion of the cycle.

Which laundry items are safe for the sanitary cycle?

Because the sanitary cycle produces water hot enough to brew tea, it can easily ruin delicate fabrics. High heat causes natural fibers like wool to shrink, while synthetic materials can warp or lose their shape. You must sort your laundry carefully before choosing this setting.

Sturdy, colorfast cottons handle this cycle best. You can safely load:

  • White cotton bath towels, hand towels, and washcloths.
  • Heavy cotton bed sheets, duvet covers, and pillowcases.
  • Cloth diapers, cotton burp cloths, and training underwear.
  • Cotton kitchen dishcloths, bar mop towels, and cloth napkins.
  • Heavy-duty work coveralls and cotton medical scrubs.

Keep delicate, synthetic, or heat-sensitive items far away from this setting. Never use the sanitary cycle on:

  • Wool, cashmere, or mohair, which will shrink down several sizes instantly.
  • Activewear containing spandex, elastane, or Lycra, as extreme heat melts the stretch fibers.
  • Bras, swimsuits, and underwear with elastic waistbands that will turn brittle and snap.
  • Silk shirts, lace garments, and sheer synthetic blouses.
  • Clothes with glued designs, plastic graphics, or iron-on patches, which will peel or melt.
  • Bright or dark garments that bleed dye when exposed to high heat.

Always inspect the fabric care tag on questionable garments. Look for the small wash tub symbol. If the tag shows a tub with a single dot, that garment requires cold water only. If it specifies a maximum temperature below 140 degrees, keep it out of the sanitary wash.

Why does the sanitary cycle take so long?

A standard wash cycle usually finishes in 40 to 55 minutes, but a sanitary cycle routinely takes 90 minutes to two hours. This extended time is completely normal. The machine is performing several demanding heating and cooling tasks that cannot be rushed without damaging clothes or electrical circuits.

The primary time consumer is the heating phase. A standard 120-volt 3-prong grounded wall outlet supplies a safe, limited amount of electrical power. The small built-in heater inside the drum cannot boil gallons of water instantly like a commercial steam plant. It warms the wash water gradually, rising a degree or two per minute until it reaches its target.

Once the machine hits the target temperature, the sanitation timer begins. The drum continues to tumble for 15 to 30 minutes while holding that peak heat. This guarantees that every towel and sheet spends enough time in direct contact with the hot wash bath to eliminate stubborn germs.

Finally, the machine must cool the load down safely before draining. Pumping scalding water straight into household PVC drain pipes can soften the plastic joints over time. Many washers introduce a trickle of cold tap water near the end of the wash phase to bring the temperature down safely before starting the high-speed spin.

How much electricity does the cycle use?

Running a sanitary cycle uses noticeably more electricity than a standard warm or cold cycle. When your washer runs on cold water, the motor turning the drum uses very little power. The vast majority of laundry energy normally comes from your home water heater warming the incoming tap water.

On a sanitary cycle, the washer becomes an active electrical heater. The built-in heating element typically pulls between 1,000 and 1,400 watts while it raises the water temperature. Because it runs for an extended period, each sanitary load uses roughly two to three times the electricity of a normal warm wash load.

This increased energy draw will not cause a shocking spike on your monthly electric bill if you use the cycle thoughtfully. Running two or three sanitary loads per week for dirty towels, soiled sheets, or cloth diapers adds only a few dollars over the course of an entire month. The key is treating the setting as a specialized tool for problem laundry, not an everyday default for lightly worn shirts.

You can also keep power usage efficient by washing full loads rather than partial loads. Heating a half-empty tub of water takes almost as much energy as heating a full load. Filling the drum properly ensures you get the maximum hygienic benefit out of every watt the machine pulls.

How can you sanitize clothes without extreme heat?

When someone in your home is sick, you often need to disinfect workout clothes, synthetic pajamas, or colored blankets. Because high heat would ruin the stretch fibers or fade the dyes, you cannot use the sanitary cycle. Fortunately, you can eliminate germs on delicate fabrics using laundry-safe chemical sanitizers and smart wash habits.

Liquid laundry sanitizers are the most practical solution for modern synthetic clothing. These products kill bacteria in cold or warm water without bleaching out colors. You pour the sanitizer into the fabric softener compartment, not the main detergent drawer. This ensures the sanitizer releases during the rinse phase, giving it uninterrupted contact time with clean fabric.

Oxygen bleach is another reliable choice for washable colors and synthetics. Unlike standard chlorine bleach, oxygen bleach uses sodium percarbonate to break down organic stains and freshen fabrics safely. Dissolve the powder in warm water, add it to your wash tub, and run a regular delicate or gentle cycle with an extended soak period.

Household chlorine bleach remains the gold standard for pure white cottons and bleach-safe linens. Measure half a cup into the designated bleach dispenser on your machine so it dispenses at the correct moment in the cycle. Never pour raw chlorine bleach directly onto fabrics, and never mix it with ammonia, vinegar, or liquid sanitizers.

Hanging damp laundry outside on a clothesline offers an effective, natural final step. Direct sunlight provides ultraviolet light that naturally breaks down odors and bacteria on fabric surfaces. Sunlight acts gently on synthetic fibers while keeping your colored workout clothes fresh without machine heat.

Keeping your appliance clean also prevents clean clothes from picking up odors during the wash. Using a washing machine with a self-cleaning tub cycle regularly removes built-up soap residue and mildew from hidden crevices inside the outer drum.

FAQs

Do you still need laundry sanitizer with this cycle?

No, you do not need to add laundry sanitizer when using a genuine sanitary cycle. The extreme heat generated by the small built-in heater inside the drum is sufficient to eliminate illness-causing germs and bacteria on its own. Adding extra chemical sanitizers to a super-hot wash is an unnecessary expense and can cause excess suds or skin irritation.

Does the sanitary cycle remove stubborn odors?

Yes, the sanitary cycle works exceptionally well on persistent, sour laundry odors. Mildew, body oil buildup, and lingering sweat smells are caused by bacteria trapped deep inside fabric fibers. The combination of sustained high heat and extended wash time dissolves the oily binder and kills the odor-producing bacteria completely.

Can using the sanitary cycle damage your washer?

Using the sanitary cycle will not damage a machine that came equipped with the feature from the factory. Washers with this button use heavy-duty water valves, high-temp hoses, and heat-resistant seals designed for high temperatures. You should simply verify that your home electrical outlet is a standard 120-volt 3-prong grounded wall outlet in good repair to handle the continuous heating draw.

Does a sanitary cycle clean the washer drum too?

The sanitary cycle helps clean the drum, but it does not replace a dedicated tub-clean cycle. A sanitary cycle uses water levels matched to your laundry load, so it only cleans the lower portions of the tub that touch the water. A proper self-clean cycle fills the tub higher and agitates aggressively to scrub detergent residue off the upper basket walls.

4.3
3 ratings
Helen Thrower
WRITTEN BY
Helen Thrower
In Dallas, Helen Thrower, a female editor known for her fascination with innovative designs, explores the realm of home appliances. With a degree in Industrial Design, she paints vivid pictures of modern, smart appliances for her readers.