Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Wide Are a Washer and Dryer Side by Side?

Prime for Young Adults: check your eligibility on Amazon

At the laundry closet, someone holds a tape measure against the wall and wonders if two machines will fit. Many full-size washers and dryers are about 27 inches wide each, so a side-by-side pair needs roughly 54 inches for the machines alone. The exact width varies, and that estimate doesn’t include extra room around the machines.

Compact models are smaller, while stacked machines use less floor width because one sits above the other. Hoses, door swings, and the space the maker says to leave around each machine can affect the fit, too. A narrow doorway or hallway may also stop a pair from reaching the laundry area, even if the machines fit once they’re inside. Measure the space and the route in, then check each machine’s listed dimensions and spacing instructions before ordering.

Use the machine type to estimate the width

Full-size washers and dryers are commonly about 27 inches wide apiece, but that is only a starting point. The exact width depends on the model, and a pair that measures about 54 inches across on paper may need more room once you account for space around the machines.

Compact machines are smaller than standard-size machines, and portable machines can be narrower still. Don’t assume a machine is compact just because it is sold for an apartment or has a smaller capacity. Look up its listed width before you plan the space.

Measure each machine separately, even if you’re buying a matching pair. A washer and dryer sold together may not have identical dimensions. Also check whether the listed width includes parts that stick out, such as knobs, handles, or a door.

Use the manufacturer’s listed dimensions for the model you’re considering. If the listing is unclear, ask the manufacturer or seller whether the measurement includes the widest part of the machine. A small difference can matter in a tight closet or laundry nook.

Choose side-by-side or stacked based on floor width

Side-by-side machines use the combined width of both units across the floor. For two full-size machines, the rough estimate is about 54 inches for the appliances themselves, before you allow for any extra space around them.

Stacking puts one machine above the other, so the pair takes up the width of one machine rather than the width of two. The machines still need enough depth and height, and not every washer and dryer can be stacked. Confirm that the specific models are made to work together and that the manufacturer allows that setup.

A stacked pair can help in a narrow closet, but it may not solve every fit problem. You still need room to open the doors, reach the controls, connect the hoses, and move the machines into place. Check the listed height of the full stacked setup, not just the height of either machine on its own.

Don’t plan around the width of the machines alone. A closet may be wide enough for a side-by-side pair but too shallow for the backs of the machines and their hoses. A doorway may also be narrower than the laundry space, making delivery the harder part.

Measure the laundry space, doorway, and route in order

Measure the place where the machines will sit, then check every opening and turn along the way. Write down each measurement so you can compare it with the appliance dimensions and delivery guidance before ordering.

  1. Measure the width of the laundry space. Hold a tape measure across the opening at the front, then check farther back if you can. Walls, trim, shelves, and a narrow section near the floor can make the usable width smaller than the opening looks.
  2. Measure the depth. Measure from the back wall to the front edge of the space. Note anything that could reduce that room, such as a door, a shelf, a baseboard, or a pipe. Leave room behind the machines for hoses, following the manufacturer’s instructions.
  3. Measure the height. Check under shelves, cabinets, and sloping ceilings. For a stacked setup, compare the available height with the full height of the washer and dryer together, including any stacking parts the manufacturer requires.
  4. Check how the doors open. Open the laundry closet door and picture the washer and dryer doors open, too. A machine may fit when everything is closed but block the hallway or make it hard to load laundry when a door swings out.
  5. Measure the doorway and route into the home. Check the narrowest doorway, hallway, stair landing, and turn between the delivery entrance and laundry area. Measure the clear opening, not just the door slab, and note handles, trim, or other obstacles.
  6. Compare your notes with the appliance and delivery details. Check the manufacturer’s listed width and depth, along with the delivery provider’s instructions for entry and installation. If a turn or opening looks close, ask the seller or delivery provider what measurements they need before placing the order.

For example, a laundry closet can look wide enough for two machines while its doorway is too narrow for one machine to pass through. Measuring the opening and the route ahead of time can help prevent a delivery that cannot be completed.

Measure twice if you’re working in a tight space. Keep the tape level and measure from the surfaces that will actually limit the machine, not from a nearby wall or door frame that sits farther out.

Leave room for hoses, doors, and the maker’s instructions

The machine’s listed width is not the same as the full space it needs. Hoses and connections sit behind the washer, and the machine may need extra space at the sides or top. Follow the manufacturer’s clearance guidance, which means the extra space the machine needs around it.

  • Check the back of the space. Leave room for the hot and cold water hoses and the drain hose. A common planning allowance is 4 to 6 inches behind the machine for hoses, but the right amount depends on the model and how its connections sit. Confirm the required space in the manual or product details.
  • Check the sides and top. Look for the manufacturer’s required side and top space. Don’t squeeze a machine tightly between walls or under a shelf unless the maker says that setup is allowed.
  • Account for doors and handles. The washer or dryer door may extend into a walkway when open. Check whether the door opens the direction you need, and confirm whether the door can be reversed if its swing causes a problem.
  • Think about controls and access. Make sure you can reach the controls and open the detergent drawer, if the model has one. A machine that fits but leaves no room to use its controls can turn laundry into an awkward daily task.
  • Don’t force hoses into a tight gap. Kinked or pinched hoses can interfere with water flow or draining. If the connections leave too little room, ask the manufacturer or an appliance installer how to arrange the space safely.

Trim and baseboards can change the usable dimensions, too. If the machine must sit in front of a baseboard, measure from the wall behind it and account for the amount the baseboard projects. Don’t remove trim or change plumbing just to make a machine fit unless you know what the change involves.

Confirm the exact dimensions before you order

Use the product page, the manufacturer’s manual, or the manufacturer’s customer service to confirm the measurements for the exact model. A general size estimate cannot tell you whether a particular machine will clear your doorway or fit beside a wall.

  • Check the listed width, depth, and height for each machine, not only the dimensions of the pair as a set.
  • Ask whether the listed width includes knobs, handles, or other parts that stick out.
  • Check the maker’s required space around the sides, back, and top.
  • For a stacked setup, confirm that the washer and dryer can be stacked together and check the full assembled height.
  • Compare the machine’s delivery dimensions and entry instructions with your doorway and route into the home.

If the details don’t give a clear answer, pause before ordering. Ask the seller or manufacturer to confirm the widest point and the space needed for installation. If you’re replacing an appliance, the old machine’s size is not a guarantee that a new one will fit in the same spot.

Once the measurements work, you can compare other needs, such as reliability and the cycles you use most. For general buying questions, see what to look for in a reliable washing machine.

FAQs

Do stacked machines need less width?

Yes. A stacked washer and dryer use the width of one machine across the floor, rather than the combined width of two side-by-side machines. Confirm that the models are designed to stack and leave the required space around the full setup.

Should I measure the doorway before buying?

Yes. Measure the narrowest doorway and every tight turn on the route to the laundry area. A machine can fit in the laundry space but still be too wide to get through an entrance or hallway.

How much extra room should I leave around a washer and dryer?

There isn’t one amount that works for every model. Hoses, doors, and installation needs affect the space required, so check the manufacturer’s instructions for the exact machines. Leave enough room for the hoses without bending or pinching them.

Can I rely on the width of my old machines?

No. A replacement may have different dimensions, even if it serves the same purpose or comes from the same manufacturer. Check the exact model’s listed measurements and compare them with your space, openings, and clearance needs.

4
1 ratings
Cody Rayburn
WRITTEN BY
Cody Rayburn
Cody is a home appliances editor based in Portland, Oregon. She specializes in eco-friendly and sustainable home appliances. With a decade of experience in the field, Cody is known for her comprehensive reviews and guides that focus on the environmental impact of appliances.