Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Wash Shoes in a Washing Machine Without Ruining Them

Prime for Young Adults: check your eligibility on Amazon

Canvas sneakers, running shoes, and synthetic mesh trainers can safely go through the washer on a cold, gentle cycle. Real leather and suede, however, will crack and ruin when soaked in water. A heavy pair tumbling loose inside the drum sounds like a brick hitting metal, which can knock the machine off-balance. Placing your footwear inside a zippered net pouch with a few old bath towels prevents loud banging and keeps the machine spinning smoothly.

Getting clean sneakers without damaging them comes down to the fabric, the water temperature, and proper drum padding. Hot water melts sole glue and shrinks synthetic materials, making cold water essential. Extra padding from towels also absorbs impacts so the tub does not take a beating during the spin. Here is how to prepare the laces, protect your washer, and clean your shoes safely from start to finish.

Which Shoe Materials Are Safe for the Washing Machine?

Not every pair of dirty shoes can handle a cycle in the wash basket. Before you touch a single control button, check the material of your footwear. Some fabrics tolerate soapy water and tumbling with ease, while other materials will crack, warp, or peel apart after a single cycle.

Here is a quick checklist of common shoe materials that are safe to machine wash:

  • Canvas: Classic canvas sneakers, slip-ons, and casual boat shoes hold up very well. The woven cotton fabric handles soapy water and tumbling without losing its shape.
  • Synthetic nylon and polyester: Most modern running shoes and gym trainers use synthetic mesh. These fabrics dry quickly, resist water stains, and will not shrink in cold water.
  • Knit uppers: Flexible, sock-style running sneakers wash easily. But they need the shield of a zippered pouch so the woven loops do not snag on the drum.
  • Faux leather accents: Small synthetic leather patches on athletic shoes generally survive a slow wash, as long as they are stitched securely rather than glued on.

Keep these materials completely out of your washing machine:

  • Genuine animal leather: Real leather contains natural oils that keep the hide flexible and soft. Soaking leather in water strips those oils away, leaving the shoes stiff, cracked, and brittle once dry.
  • Suede and nubuck: Water ruins the brushed nap of suede on contact. It causes dark water spots, bleeds the dye, and leaves the texture rough and stiff.
  • Glued accents and light-up soles: Avoid washing footwear decorated with glued rhinestones, sequins, or built-in flashing lights. The tumbling action knocks glued gems loose, and water short-circuits the battery lights.
  • Rope or jute soles: Espadrilles and rope-trimmed slip-ons will unravel when saturated with water, destroying the sole structure permanently.

Step-by-Step Instructions to Machine-Wash Your Shoes

Washing your footwear properly takes just a few minutes of prep work. Following these steps in order keeps your shoes intact, protects your plumbing from gravel, and stops loud banging.

  1. Scrape off loose mud and gravel from the soles. Use an old toothbrush or a dull butter knife over a trash can to pry out pebbles stuck in the tread. Reason: Trapped pebbles can chip the wash basket, and loose soil turns the water into grinding mud that can clog the lower pump filter catch.
  2. Unthread the shoelaces completely. Pull each lace all the way out of the eyelets rather than washing them tied to the shoes. Reason: Removing the laces lets soapy water reach deep sweat on the tongue, and it keeps long strings from tangling around the center agitator post that twists clothes through the water.
  3. Pull out the removable inner foot pad. Slip your fingers under the heel cushion and lift it out gently. Reason: Taking out the removable inner foot pad helps water rinse deep inside the footbed, and it keeps thick foam cushions from holding foul odors.
  4. Tuck laces and inner foot pads into a small zippered net pouch. Zip them shut and tuck the zipper pull under the protective elastic tab. Reason: Small loose items can slip past the rubber door boot or lodge between the wash tub and the outer drain basin.
  5. Slide each shoe inside a padded wash bag or zippered net pouch. Place the shoes inside the pouch and close the zipper tight. Reason: The net pouch holds the shoes securely so they do not strike the metal walls, shielding the plastic eyelets from scratches.
  6. Load three to four old bath towels into the tub. Pick medium-weight towels in neutral colors that have already been washed many times. Reason: The towels pad the heavy soles during the cycle and spread weight evenly so the off-balance safety sensor that pauses spinning and beeps when bulky towels or blankets bunch up on one side is not triggered.
  7. Pour a small splash of liquid low-suds HE detergent into the dispenser. Use only one or two tablespoons of standard liquid laundry soap. Reason: Liquid detergent dissolves instantly in cold water, while dry powder detergent leaves chalky residue trapped inside the toe box fabric.
  8. Select a slow, gentle wash mode using cold water. Turn your dial to the delicate cycle and make sure the temperature reads cold. Reason: Cold water keeps sole adhesives from softening, while slow agitation protects delicate stitching from pulling loose.
  9. Adjust the spin speed down to the lowest active setting. Choose low spin or delicate spin on your machine control panel. Reason: High spin speeds fling heavy, water-soaked sneakers against the drum walls with immense force, straining the appliance suspension springs.
  10. Pull the shoes out the moment the cycle finishes. Open the door right away and carry the shoes to a dry, airy room. Reason: Leaving wet footwear sitting inside a closed, dark drum invites sour mildew smells within just a few hours.

How to Cushion the Drum and Protect Your Washer

The loudest part of cleaning sneakers is the heavy thudding sound of rubber soles striking metal. That violent banging is not just annoying to listen to. It can jar the washing machine off its level feet, scratch the drum finish, or trigger error codes mid-cycle.

Never wash sneakers alone in an empty wash basket. When two heavy shoes tumble by themselves, they act like rubber mallets beating against the stainless steel clothes tub. Over time, that repeated impact can damage drum bearings and loosen drive pulleys.

Adding several old bath towels solves this problem right away. As the drum rotates, the wet towels wrap around the footwear, catching the shoes before hard rubber hits bare metal. Towels also hold enough water to act as counterweights, keeping the drum spinning smoothly without violent wobbling.

Your appliance design also changes how footwear behaves during a wash. Drum motion is a major factor when deciding whether a top or front load washing machine is right for your laundry room. Front load washers lift items up and drop them down, which causes louder thumping if you skip the towels. Top load machines with a flat bottom wash plate (impeller) that moves laundry using water currents keep shoes rolling gently along the bottom. But if your machine uses a tall center agitator post that twists clothes through the water, a zippered wash bag is mandatory to keep shoe tongues and eyelets from snagging on the fins.

Choosing the Right Cycle, Water Temperature, and Soap

Getting your shoes fresh requires the right water chemistry. Setting the wrong cycle can ruin the fit of an expensive pair of running shoes in less than an hour.

Always use cold water when washing shoes. Modern sneakers use industrial adhesives to glue the foam midsole to the outer tread and canvas body. Hot or warm water softens that glue. Once the adhesive warms up, the toe guard can peel back and the layers of the sole can begin splitting apart. Cold water keeps those glues solid while safely lifting dirt.

Use only liquid low-suds HE (High Efficiency) detergent. Powder detergents need warm water to dissolve thoroughly. When used in cold water, dry powder often leaves a gritty, white paste inside the toe box. Excessive suds can also cushion the water too much, preventing a clean rinse and leaving a soapy film that attracts fresh dirt the moment you step outside.

Never use chlorine bleach or liquid fabric softener on footwear. Chlorine bleach turns white foam midsoles a dull yellow and weakens synthetic stitching. Fabric softener leaves a waxy coating across synthetic mesh, which clogs the tiny pores, locks in foot odor, and stops sweat from evaporating.

If your shoes have crusty mud, grass stains, or ground-in grease on the rubber edges, pre-treat them before washing. Dab a drop of mild dish soap directly onto the stains with a soft brush and let it sit for ten minutes. If your laundry pair includes a washing machine with soak cycle, running that short soak step helps loosen stubborn outdoor grime before the gentle wash begins.

How to Dry Your Shoes Safely Without Warping Them

Washing your shoes correctly is only half the job. How you dry them decides whether they stay comfortable or warp into stiff, unwearable blocks.

Never put running shoes or canvas sneakers in a tumble clothes dryer on normal heat. The intense heat inside a dryer drum is far hotter than warm tap water. That dry heat shrinks synthetic mesh, curls rubber bumpers, and melts sole glue completely. The tumbling inside a dryer also subjects damp shoe seams to unnecessary physical stress.

Follow these steps to air-dry your shoes safely:

  1. Stuff the toe box with plain paper towels or small cotton cloths. Push the paper firmly into the front of the shoe until it fills out its natural shape. Reason: The paper wicks moisture out from the inside while keeping the damp fabric from wrinkling or caving inward. Avoid printed newspapers, because wet ink transfers onto shoe linings.
  2. Replace the damp paper after two hours. Pull out the paper once it feels damp and push fresh, dry paper towels inside. Reason: Swapping the paper keeps moisture moving outward and cuts total drying time down significantly.
  3. Set the shoes in a room with steady air movement. Place them near an open window, an oscillating desk fan, or an air conditioning vent. Reason: Moving room-temperature air evaporates moisture fast without exposing delicate glues to heat damage.
  4. Keep shoes away from direct summer sunlight. A shaded porch or patio works well, but do not set damp sneakers under scorching sun rays. Reason: Intense ultraviolet rays fade colored canvas and bake rubber soles until they crack.
  5. Wait a full 24 to 48 hours before lacing them up. Reach deep into the front corners to verify the footbed is completely dry before wearing them. Reason: Walking around in damp foam midsoles crushes internal cushioning cells and invites mildew and skin irritation.

What to Look for in Shoe Bags and Washer Features

If you plan to clean sports shoes, school sneakers, or slip-on canvas shoes regularly, a few handy tools and appliance settings make the chore much simpler.

A specialized shoe laundry bag offers far more protection than a flimsy net sack. Look for bags lined with thick, padded mesh or soft microfiber cleaning fingers. The dense padding absorbs the shock when shoes tumble against the metal tub, while the microfiber lining scrubs outer fabric surfaces during the cycle. Check that the bag includes an auto-locking zipper with an elastic keeper band so the zipper pull does not slide open or scratch the inner wash basket.

When it comes to washer features, control over cycle speed is what helps most. Machines that allow you to pick a slow, gentle wash mode while independently turning the spin speed down to low or off give you the safest wash. Washers equipped with a flat bottom wash plate (impeller) rather than a tall center post also give bulkier items like shoes more room to circulate without catching on moving parts.

1
  • TAR Score

    TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more

    9.6
  • Brand
    NMQHPA
2
  • TAR Score

    TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more

    9.2
  • Brand
    Fyntric
3
  • TAR Score

    TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more

    8.9
  • Brand
    ZENO
4
  • TAR Score

    TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more

    8.1
  • Brand
    Bloomm Mart
5
  • TAR Score

    TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more

    7.5
  • Brand
    SHEELA HO

Last update on 2026-10-30 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API

FAQs

Can you wash shoes with regular clothes?

It is best not to wash shoes with your everyday shirts, pants, or bed linens. Heavy shoe soles can abrade lighter garment fabrics, and street dirt from shoe treads should not mix with clothes you wear against your skin. Instead, wash shoes only with a few older bath towels that cushion the drum and balance the spin load.

How often should you wash sneakers in the washing machine?

Keep full machine washes down to once every month or two for shoes you wear often. While a cold, gentle cycle is safe, submerging footwear in water too often will gradually weaken stitching and sole glue. For light everyday scuffs, wipe the rubber soles and upper fabric with a damp rag and mild soap between machine washes.

Will washing shoes damage the washing machine drum?

Washing shoes will not damage your appliance if you cushion the tub with bath towels and place the shoes inside a net pouch. Damage happens when people wash loose, heavy shoes alone on high spin speeds. That causes the rubber heels to slam hard against the tub, which can knock the drum suspension rods out of balance.

What should you do if your shoes smell like mildew after washing?

Mildew smells develop when shoes take too long to dry or sit inside a closed washer after the cycle ends. If your shoes smell sour, sprinkle two tablespoons of baking soda inside each shoe and let it sit overnight to neutralize trapped odors before shaking it out. For future washes, set the damp shoes in front of a running box fan so they dry completely within a single day.

4.7
3 ratings
Stephen Vancleave
WRITTEN BY
Stephen Vancleave
Hey there! I'm Stephen, a guy who's crazy about all things home appliances. I've been writing, testing, and comparing these gadgets for 15 years from my base in San Francisco. I've got a degree in Industrial Design from Stanford, but my real education comes from hands-on experience.