Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Safely Wash a Mattress Topper in a Washing Machine

Prime for Young Adults: check your eligibility on Amazon

Fluffy mattress toppers made of cotton, down, or polyester can safely go into a standard washing machine. The single detail that changes this answer is the type of filling inside. Soft, fiber-filled toppers handle water easily, but solid memory foam or latex will soak up water like a giant sponge and shred during the spin cycle. For solid foam, only the zippered outer cover belongs in the wash.

Fit and drum design also matter just as much. Bulky bedding needs lots of breathing room, which means large front-load washers or top-loaders without an agitator (the tall center spindle in the tub) do the job best. Jamming a thick pad into a cramped drum can throw the machine off balance and leave heavy soap residue behind. Here is how to wash the right materials, dry them properly, and spot-clean delicate foam by hand.

The Short Version

  • Fiberfill, down, and cotton toppers can go into a washing machine, provided your washer tub is large enough and does not use a tall center agitator post that can snag the fabric.
  • Solid memory foam and latex toppers must never go into a washing machine because soaking foam with water and spinning it will shred the core into wet chunks and strain your washer motor.
  • Wash the removable zippered cover separately in the machine if your foam topper has one, then spot-clean the inner foam slab by hand using mild soapy water and baking soda.
  • Dry washable toppers completely on low heat with clean dryer balls to break up clumps, because trapped moisture leads to mildew (damp musty mold) inside the padding.

Check Your Topper Material and Care Tag First

Before you drag your mattress topper to the laundry room, you must know what is inside it. Different materials react to water and spin cycles in completely different ways. Putting the wrong padding into an automatic washer can destroy the topper in minutes and leave you with a flooded laundry room floor.

Start by locating the sewn-in care tag, which is usually tucked along one of the corner seams. This tag gives you the manufacturer instructions for water temperature and cleaning methods. Look for a wash tub icon with water lines, which indicates machine washing is permitted. If the tag says spot clean only or displays a tub icon with an X through it, keep the topper out of your washing machine.

If the tag is missing or faded, use this physical checklist to identify what you have:

  • Fiberfill (fluffy polyester stuffing): This feels like a plush, squishy bed pillow or a thick winter jacket. The stuffing is sewn into quilted squares or pockets across the surface. These toppers are machine washable if your washer drum has enough room.
  • Down or feather fill: This feels soft, light, and airy, with tiny quills detectable through the fabric shell. These are generally machine washable on gentle settings, but they require extra care and extended drying times.
  • Solid memory foam: This feels like a dense, heavy sponge that slowly contours to your hand when you press down. Solid slabs of memory foam should never be washed in a machine under any circumstances.
  • Egg-crate foam: This is a lightweight polyurethane foam pad with ridges and valleys that look like an egg carton. Like solid memory foam, it will tear and disintegrate if subjected to machine agitation.
  • Latex foam: This feels springy, heavy, and rubbery with small pinholes running through the material. Latex is too dense for a home washer and will crumble when wet.
  • Removable outer covers: Many solid foam toppers come enclosed in a thin, zippered fabric cover. Check if the cover unzips completely. While the foam inside cannot go into the washer, the fabric cover almost always can.

The danger with solid foam comes down to physics. Memory foam is full of tiny open air pockets. When submerged, it acts like a giant sponge, absorbing dozens of pounds of water. A standard home washer cannot spin that much dead weight. The waterlogged foam can snap your washer drive belt, burn out the pump, or throw the tub so violently off balance that it damages the frame of your machine.

How to Wash Machine-Safe Fiberfill or Down Toppers

If you confirmed that your topper contains loose fiberfill, cotton, or down feathers, you can clean it in a washer by following these steps. Take your time during each stage so the fabric does not snag or rip open.

  1. Inspect your washing machine drum. Your washer must be large enough for the topper to move freely. A cramped topper will not get clean and will rub against the door glass or drum walls. You also need to look at the drum design. When choosing between a front load or top load washer for bulky bedding, front loaders and top loaders with a flat bottom wash plate (impeller) that moves laundry using water currents are safe. Avoid top-load machines that have a tall center agitator post that twists clothes through the water, as the post can grab the fabric, twist it into knots, and rip the quilted seams wide open.
  2. Check for tears and pre-treat heavy stains. Look across all the seams and corners for loose threads or small rips. If filling can escape through a small hole, stitch it closed before washing. If you see sweat marks, pet accidents, or coffee spills, pre-treat them now. Dab a small drop of liquid laundry detergent or an enzyme stain remover onto the spot with a damp washcloth. Let it sit for 15 minutes to break down the oils before loading the machine.
  3. Load the topper evenly into the inner wash basket. Do not roll the topper into a tight ball and shove it inside. Instead, fold it loosely like an accordion or drape it in an even ring around the perimeter of the stainless steel clothes tub. Balancing the weight around the perimeter prevents the off-balance safety sensor that pauses spinning and beeps when bulky towels or blankets bunch up on one side.
  4. Add a small amount of low-suds HE (High Efficiency) detergent. Pour in about half the amount of detergent you normally use for a regular load of clothes. Fluffy fiberfill and dense down trap soap bubbles deep inside their fibers. Excess suds cause leaks, pump errors, and leave a stiff, sticky residue on the fabric that attracts dirt later. Skip fabric softeners entirely, because softeners coat the fibers and ruin their natural fluffiness.
  5. Set your wash cycle and water temperature. Select the delicate or gentle cycle on your machine. This setting uses slower agitation speeds to protect the stitched seams. Use cool or warm water. Hot water can shrink cotton shells or melt delicate polyester stitching.
  6. Run an extra rinse and an extra spin-only setting. Once the wash cycle finishes, run a second rinse cycle with plain water to flush out any trapped soap bubbles. After the rinse is done, run an extra spin-only setting at medium or high speed. This extracts as much moisture as possible, which cuts down your drying time substantially.

How to Dry a Topper Thoroughly to Prevent Mildew

Washing your topper is only half the battle. Drying it correctly is just as critical. If you leave even a small pocket of dampness inside the thick padding, mildew (damp musty mold) can start growing within 24 to 48 hours, leaving behind sour odors that are almost impossible to remove.

  1. Move the bedding to the dryer immediately. Never let a wet mattress topper sit inside the dark, humid washer tub after the cycle ends. Take it out right away, shake it out gently to untangle any folds, and place it into your clothes dryer.
  2. Toss in three or four clean wool dryer balls. If you do not own wool dryer balls, clean tennis balls placed inside clean white socks work just as well. As the dryer spins, these balls repeatedly bounce against the topper, breaking up clumps of wet fiberfill or down and allowing warm air to pass through the center of the padding.
  3. Select low heat or the no-heat air fluff setting. High heat is the enemy of synthetic bedding. Hot dryer air can melt polyester fiberfill, singe down feathers, and warp the outer fabric shell. Set the machine to low heat or delicate tumble. While low heat takes longer, it protects the materials from heat damage.
  4. Stop the machine every 25 to 30 minutes to fluff the load. Mattress toppers tend to roll themselves into a tight cylinder while tumbling in a dryer drum. Every half hour, pause the cycle, pull the topper out, shake it vigorously, and reload it with the damp center facing outward. This prevents the outer edges from overheating while the middle stays soaked.
  5. Confirm the core is completely dry before use. When the cycle finishes, take the topper out and press both hands firmly into the thickest quilted squares. Feel for any coolness or sponge-like resistance that signals trapped moisture. If you detect any dampness, run the dryer for another 20 minutes. If the weather is warm and dry, you can also drape the topper over a porch railing or drying rack in indirect sunlight for an hour to air it out completely.

How to Clean a Solid Memory Foam Topper Safely Instead

If you own a solid memory foam or latex topper, you cannot use an automatic washer, but you can still get it fresh and clean using simple manual methods. Keeping moisture to a minimum is the secret to protecting the foam structure.

Start by unzipping the outer protective fabric cover if your topper came with one. Take the cover off and inspect its care label. Most fabric covers can go directly into your washing machine on a gentle cycle using cold water and low-suds HE detergent. Tumble dry the cover on low heat or hang it on a line to dry.

Next, clean the bare foam slab on the bed or on a clean floor using these steps:

First, vacuum the entire surface. Attach an upholstery brush to your vacuum cleaner hose. Slowly glide the brush across the top and sides of the foam to pull up dust mites, dead skin flakes, pet hair, and loose dirt that settle into the tiny surface crevices.

Second, spot-treat noticeable stains with a mild soap solution. Mix one teaspoon of clear, gentle liquid dish soap into two cups of lukewarm water until it forms suds. Dip a clean white microfiber cloth into the soapy water, wring it out until it is barely damp, and gently dab the stain. Work from the outside of the stain toward the center so the spot does not spread. Never pour water, hydrogen peroxide, or harsh bleach directly onto memory foam, as these chemicals dissolve the foam cells and cause the pad to pit and crumble.

Third, blot away the moisture immediately. Take a dry, clean towel and press it firmly into the treated area using your full body weight. The dry towel will draw the moisture out of the foam. Repeat this with a fresh dry towel until no more dampness transfers to the cloth.

Fourth, eliminate odors with plain baking soda. Sweat and body oils naturally soak into mattress toppers over time. To neutralize lingering odors, sprinkle a generous, even layer of baking soda over the entire top surface of the foam. Let the powder sit undisturbed for at least two to four hours. The baking soda acts like a sponge for smells and residual moisture. Once the time is up, vacuum the powder away thoroughly using your upholstery brush.

Fifth, let the foam dry completely with good airflow. Prop the topper up on its side against a wall or lay it flat across clean chairs in a room with open windows. Aim an electric floor fan directly at the damp spots to speed up evaporation. Depending on your home humidity, the foam can take anywhere from 8 to 24 hours to dry down to the core. Do not put the fabric cover back on or place the topper on your mattress until the foam is completely dry to the touch.

FAQs

Can you put a memory foam topper in the clothes dryer?

No, you should never place solid memory foam in a clothes dryer. The intense, direct heat from the dryer drum will scorch, melt, and crumble the delicate foam cells. High heat can also cause the foam to shrink unevenly or create a serious fire hazard. Always air dry memory foam using floor fans and natural room ventilation instead.

What should you do if the washing machine starts shaking violently or stops mid-cycle?

Violent shaking happens when the topper bunches up on one side of the drum, causing the off-balance safety sensor to trip and pause the cycle. If this happens, cancel the cycle, open the door, and manually unroll the topper so its weight is distributed evenly around the inner wash basket. Once the load is balanced, close the door and restart a spin-only setting to remove the water.

Is it better to wash a bulky mattress topper at a local laundromat?

Yes, taking a large queen or king topper to a commercial laundromat is often the safest and easiest option. Laundromats feature massive front-load washers with deep tubs that give bulky bedding plenty of room to tumble without bunching up or stressing the motor. Their commercial dryers also provide high airflow at safe, low temperatures, which dries thick fiberfill much faster than a standard home appliance.

How often should you wash or deep clean a mattress topper?

You should wash a fiberfill topper or the removable fabric cover of a foam topper every three to six months to keep dust, sweat, and allergens under control. If you sleep with pets or have seasonal allergies, washing it every two months is a good habit. For accidental drink spills or pet stains on solid foam, spot clean the area immediately so the liquid does not soak into the center of the bed.

5
1 ratings
TAR Team
WRITTEN BY
TAR Team