Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Wash Hockey Equipment in a Washing Machine Safely

Prime for Young Adults: check your eligibility on Amazon

Tossing a bag of foul-smelling protective pads into the laundry is completely safe as long as the right pieces stay out. In fact, most fabric and foam pads can go straight into the washing machine on a gentle, cold-water cycle without losing their shape. Shin guards, elbow pads, chest protectors, and synthetic gloves hold up well in the wash, quickly clearing out stubborn sweat and odor.

A few basic rules decide how each load turns out. Helmets, skates, and genuine leather gear must stay out of the drum, since soaking breaks down protective shells and ruins animal hides. The style of machine matters as well, because a washer without a twisting center post keeps loose straps from tangling and snapping. Sticking to cold water also stops glued padding from melting. Here is how to prep each item so the entire kit gets clean without causing any damage.

The Short Version

  • Wash protective pads, jerseys, base layers, and socks in a front-load washer or a top-loader with a flat bottom wash plate using cold water and a gentle cycle.
  • Leave helmets, skates, and items made with genuine leather out of the machine completely, as heavy water saturation and spinning will destroy them.
  • Fasten every strap tightly and place smaller gear in mesh laundry bags to protect the fabric, padding, and the stainless steel clothes tub.
  • Air-dry all equipment in front of a running box fan, and never put protective pads in a clothes dryer where high heat will warp plastic and melt foam.

What Hockey Gear Can Go in the Washer and What Must Stay Out

Hockey gear takes an absolute beating on the ice, and the sweat that settles into the padding creates a distinct, stubborn odor over time. The good news is that most of your protective gear is tough enough to handle a trip through a residential washing machine. Hard plastic shells, synthetic fabrics, and dense foam cushions are built for impact, which means they can easily withstand a gentle wash cycle when handled with care.

Before tossing your entire equipment bag into the drum, sort every piece into two distinct piles. Putting the wrong piece of gear into a washer can destroy the equipment, void its safety protection, or even damage your machine.

Here is what is completely safe to put in the washing machine:

  • Shin guards: Both the hard plastic outer shells and the removable fabric liners can go in. If the liner pulls free from the shell, separate them so both get thoroughly cleaned.
  • Elbow pads: The fabric sleeves, internal foam cushions, and outer plastic caps hold up very well during a wash.
  • Shoulder pads and chest protectors: The dense foam padding and plastic caps wash clean easily, provided they fit comfortably in the inner wash basket without being forced.
  • Hockey pants and breezers: The heavy nylon shells and interior thigh pads can be washed, assuming your machine tub has enough cubic feet of space to fit them.
  • Hockey gloves with synthetic palms: Most modern gloves with synthetic microfiber palms wash very well and soften up nicely once clean.
  • Jerseys, socks, and neck guards: These knit and woven fabrics handle machine washing just like regular gym clothes.
  • Jock or jill compression shorts: The fabric shorts and pelvic protectors wash easily, but you must slide out the hard plastic protective cup first.

Here is what must stay out of the washing machine under all circumstances:

  • Helmets: Never wash a helmet in a machine. The spinning motion will crack the plastic outer shell, loosen hardware screws, and dissolve the adhesives holding the interior protective padding. Hand-wipe helmets using a damp cloth and mild dish soap instead.
  • Ice skates: The metal blades, internal structural stiffeners, eyelets, and stitched leather or composite boots will be ruined by water immersion. Wipe skate boots down with a damp cloth and dry the steel runners thoroughly after every game.
  • Gloves with genuine leather palms: While synthetic materials handle water well, real leather will dry out, turn brittle, crack, and tear the next time you hold a stick.
  • Plastic groin cups: The solid cup can crack or violently bang against the walls of the washer drum. Clean the cup by hand in a sink with warm water and soap.

How to Prep Pads, Fasteners, and Straps Before Loading

Proper preparation is the most important step in the entire process. If you toss your pads into the washer with loose straps, the rough hook side of the hook-and-loop fasteners will chew up knit jerseys, pull nylon threads from pad bindings, and scratch the interior of your washer drum. Taking five minutes to prep each item protects both your expensive hockey investment and your appliance.

  1. Empty every pocket and shake out loose debris. Check your hockey pants and jersey pockets for mouthguards, pucks, tape rolls, or loose change. Take the gear outdoors and give each piece a firm shake to dislodge dried mud, hair, and grit so that debris does not end up clogging your washer drain pump.
  2. Fasten every single Velcro strap. Take your time and press every hook-and-loop strap firmly against its matching felt strip. Make sure no scratchy hook surfaces are left exposed to rub against other pads. If a strap is too stretched out to stay closed, wrap a wide rubber band around it to hold it in place.
  3. Separate removable liners from plastic caps. Many modern shin guards, elbow pads, and shoulder pads feature removable internal foam pads attached with small velcro tabs. Peeling them apart allows the water and soap to penetrate deep into the sweat-soaked foam where odor-causing bacteria live.
  4. Pack smaller gear into zippered mesh laundry bags. Place your elbow pads, socks, hockey gloves, and neck guards inside separate mesh wash bags. These bags keep smaller pieces from tangling into a giant ball and keep straps from wrapping around other items in the tub.
  5. Loosen hockey pant laces and ties. If you are washing hockey pants, tie the waist drawstrings into a secure bow so they cannot slip inside the waistband or wrap around other pads during the cycle.

Choosing the Best Cycle, Water Temperature, and Detergent

Washing sports gear requires a careful balance between deep cleaning power and gentle fabric care. Hockey pads do not need heavy agitation to get clean; they simply need plenty of water and soap flushed through the open foam cells to carry away sweat salts and bacteria.

  1. Always select cold water. Warm or hot water can loosen the glue holding foam inserts to plastic caps. High temperatures can also warp thin plastic shells and weaken synthetic bindings. Cold water protects the shape of the pads while keeping glued seams intact.
  2. Select the delicate or gentle cycle. The delicate cycle uses a slower wash action and extended soak intervals. This allows water to saturate thick foam without violently slamming the hard plastic shells against the walls of the stainless steel clothes tub.
  3. Use a low-suds HE (High Efficiency) liquid detergent. Standard powdered detergents often struggle to dissolve completely in cold water and leave behind a white, gritty residue inside dense foam. Pour a modest amount of low-suds HE detergent into the dispenser tray. Excess soap creates thick suds that get trapped inside pads, leading to skin irritation and stiff padding once dry.
  4. Add white distilled vinegar for deep odor elimination. Pour half a cup of plain white vinegar directly into the fabric softener dispenser cup. Vinegar naturally neutralizes pungent sweat smells and cuts through stubborn mineral residues without damaging equipment. Never use standard commercial fabric softeners, as they leave a waxy coating on synthetic fibers that traps bacteria and prevents the gear from wicking moisture.
  5. Program an extra rinse cycle. Dense hockey foam acts like a giant sponge. Running a second rinse cycle ensures that all traces of dirt and soapy water are completely flushed out of the pads before the cycle finishes. If your gear has gone months without a wash, using a machine with a dedicated soak cycle helps loosen caked-on salt and deep sweat before the main wash starts.

Managing Load Balance and Machine Agitators

Hockey equipment is bulky, buoyant, and holds a lot of water. Understanding how your specific style of washing machine handles these bulky items will keep the cycle running smoothly without damaging your machine.

The type of washer you have makes a big difference:

  • Front-load washers: These are ideal for washing hockey pads. They have no center column, and the horizontal tumbling motion naturally lifts and drops pads through the water without snagging loose straps.
  • Top-load washers with a flat wash plate (impeller): These machines feature a flat bottom wash plate that moves laundry using water currents instead of a post. They offer a wide-open inner wash basket that accommodates large items like hockey pants and shoulder pads comfortably.
  • Top-load washers with a center agitator post: The center agitator post that twists clothes through the water poses a snag hazard for long straps. If you have an agitator machine, place all padded items inside zippered laundry wash bags or clean pillowcases tied shut with hair ties. Arrange the bags loosely around the post, leaving enough room for items to move freely.

Load balance is critical when washing bulky equipment. When hockey pads soak up water, they become surprisingly heavy. If you load all the heavy items on one side of the tub, the machine will vibrate violently during the spin cycle. Modern washers with balanced spin cycles that sense heavy padding will pause and attempt to redistribute water weight automatically, but you can prevent balance issues from the start.

To keep the drum balanced, distribute items evenly around the perimeter of the tub. Wash a pair of shin guards with a pair of elbow pads on the opposite side, or wash hockey pants alongside a couple of heavy towels to even out the weight. Select a low or medium spin speed. A low-speed spin pulls out enough moisture for drying without crushing fragile foam or bending plastic caps under excessive centrifugal force.

After the wash finishes and you unload your clean pads, leave the washer door or lid open for several hours. Sweaty sports gear carries strong bacteria, and keeping the door cracked allows interior moisture to evaporate, especially if you rely on a washer that prevents mold buildup.

Drying Your Hockey Gear Safely Without Heat

Washing your gear is only half the battle; how you dry it determines whether it stays fresh or develops mildew (damp, smelly mold that grows on wet fabric). Dense padding traps moisture deep inside its core, making thorough drying essential.

Never put protective hockey gear into a household clothes dryer. The intense heat inside a dryer drum will warp plastic knee and elbow caps, shrink nylon pant shells, and cause internal foam padding to disintegrate or lose its protective density. Always use natural airflow to dry your pads safely.

  1. Press out standing water with clean towels. When you remove the pads from the washer, they will feel damp and heavy. Do not twist or wring them, as this can crack interior plastic stiffeners. Instead, lay each pad flat on a dry bath towel, fold the towel over, and press down firmly with your hands to blot out excess moisture.
  2. Open every flap and pull out removable tongues. Pull every tongue on your shin guards forward and open all Velcro flaps on your elbow pads and shoulder protectors. The more surface area you expose to the surrounding air, the faster the pads will dry.
  3. Hang the gear on heavy-duty plastic or coated wire hangers. Suspend shoulder pads, hockey pants, and jerseys from a sturdy clothesline, a shower curtain rod, or a specialized hockey gear tree rack. Avoid thin wire hangers that can bend under the damp weight or stretch out shoulder padding. Place gloves and shin guards on a wire drying rack so air reaches both the top and bottom.
  4. Aim a portable electric fan directly at the equipment. Constant airflow is the secret to drying thick foam quickly. Set up a simple box fan or oscillating floor fan a few feet away from your drying rack and turn it to high speed. The circulating air will dry the thickest padding in 12 to 24 hours.
  5. Inspect the interior foam before packing the bag. Feel deep inside the palm of the gloves and behind the knee caps of the shin guards. The foam must be completely dry to the touch before you pack it back into an enclosed equipment bag. If any piece feels cool or damp, leave it under the fan for another few hours to keep mold spores from developing.

FAQs

Can you put hockey equipment in the dryer on the no-heat air fluff setting?

While the air-fluff setting uses no heat, the continuous tumbling motion inside the metal dryer drum can still damage plastic caps and loosen stitched seams. The hard shells will also bang loudly against the drum walls, which can dent the appliance interior. Hanging your equipment in front of a standard household box fan is much safer and dries the gear just as fast.

How often should hockey gear be washed in a washing machine?

Base layers, socks, and jerseys should be washed after every single skate just like everyday gym clothes. Heavy protective pads, including shin guards, elbow pads, shoulder pads, and pants, generally need a thorough machine wash once or twice per season. If your equipment begins to smell noticeably sour or feels stiff from dried sweat salt, wash it right away regardless of the calendar.

Will machine washing cause the metal rivets on hockey pads to rust?

Washing your pads will not cause rivets to rust as long as you dry the equipment promptly with moving air. Leaving pads wet inside a closed equipment bag for days is what actually causes metal hardware to corrode. As long as you run a low spin cycle to clear standing water and place the gear in front of a fan immediately, the metal rivets will dry cleanly without issues.

Can you use regular bleach or stain removers on white hockey jerseys and socks?

You should never use chlorine bleach on modern hockey apparel or protective pads. Chlorine weakens synthetic polyester fibers, damages elastane waistbands, and can yellow technical moisture-wicking fabrics. If you need to lift dark puck marks or grass stains, spot-treat the area with an oxygen-based stain remover and let it sit for twenty minutes before running the gentle wash cycle.

5
3 ratings
Cody Rayburn
WRITTEN BY
Cody Rayburn
Cody is a home appliances editor based in Portland, Oregon. She specializes in eco-friendly and sustainable home appliances. With a decade of experience in the field, Cody is known for her comprehensive reviews and guides that focus on the environmental impact of appliances.