Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Wash Football Shoulder Pads in the Washing Machine

Prime for Young Adults: check your eligibility on Amazon

Football shoulder pads can go in the washer, but only the removable soft liner should ever go inside the drum. Everything hinges on whether the padding unclasps from the rigid frame. Tossing the entire set of gear into a cycle will crack the protective plastic and dent the metal tub. Keeping the hard shell out protects both the equipment and the appliance while wiping out stubborn sweat stink.

The right method also depends on the machine style and water temperature. Washers without a center agitator (the tall spindle that twists clothes) prevent straps from snagging and ripping, while cold water keeps delicate padding foams from breaking down. If the foam is riveted to the plastic and cannot detach, an easy hand soak is the safer path. Here is how to separate the pieces, pick the proper cycle, and get football gear clean without damaging anything.

Wash Only The Removable Soft Padding In The Machine

You can wash football shoulder pads with the help of a laundry machine, but only the soft fabric and foam liner should ever go inside the drum. The rigid outer arch, epaulets, and plastic caps must stay out. Throwing an entire set of assembled shoulder pads into a washing machine will ruin both the protective gear and your appliance.

The heavy plastic shell acts like a blunt hammer against the inside of your washer. During a wash or spin cycle, those rigid plates slam repeatedly against the stainless steel clothes tub. That impact can dent the metal drum, crack the plastic protective plates, and break the inner brackets that keep the player safe on the field. The metal studs holding pads together, known as rivets, can also snag on the perforations inside the wash basket, scratching the finish or tearing loose from the plastic.

Your washer type also plays a big role in whether machine washing goes smoothly. A front-load machine or a top-load washer with a flat bottom wash plate that moves laundry using water currents is the safest option. If your top loader has a center agitator post that twists clothes through the water, you must be extra cautious. That center post easily catches loose straps, buckles, or elastic bands, which can twist the pads violently, rip the seams, or burn out the washer drive motor.

Before doing anything else, inspect how your shoulder pads are built. Modern football gear typically features a modular design where the padded vest attaches to the hard shell with heavy-duty velcro hook-and-loop strips, elastic loops, or metal snap fasteners. If you can separate the cushioned liner from the plastic frame, the liner can go into the washer. If the padding is permanently attached with metal rivets, keep the entire unit out of the machine and wash it by hand instead.

Follow These Steps To Wash The Removable Foam Liner

Once you separate the soft foam padding from the rigid plastic shell, you can safely clean it in the washing machine. Sweat, dried salt, skin oils, and grass stains sink deep into the open cells of sports foam. A thorough machine cycle flushes out those deep residues and eliminates foul odors without breaking down the padding.

  1. Detach all removable pieces completely. Unsnap the chest plates, release the hook-and-loop straps across the ribs, and pull the foam pads away from the plastic frame. If your pads have removable sub-arch pads or clavicle inserts, take those out as well so water can reach every surface.
  2. Fasten all velcro tabs. Press every hook-and-loop strip firmly against its matching piece so no rough hooks remain exposed. Exposed velcro will snag the knitted fabric of the liner, chew up the seams, and pull threads loose during the cycle.
  3. Place the pads inside a zippered net laundry pouch. A large mesh wash bag keeps the foam sections contained in one bundle. This prevents loose straps from tangling around the wash plate and protects the fabric covers from friction against the drum walls.
  4. Add towels to cushion the drum. Never wash foam pads alone in an empty machine. Place two or three thick bath towels into the wash basket alongside the bagged pads. The towels act as bumpers, dampening the thumping sound and helping machines with balanced spin cycles distribute weight evenly so the tub does not shake violently.
  5. Add the right amount of detergent. Use two tablespoons of a gentle, low-suds HE detergent or a specialized sports wash designed to target sweat enzymes. Do not use regular fabric softener. Softeners leave a waxy coating on the foam cells that traps bacteria, locks in sweat odors, and destroys the moisture-wicking properties of the lining.
  6. Select a gentle cycle with cold water. Set the washer to its delicate or gentle cycle. Always use cold or cool water, because hot water weakens the glues holding composite foam layers together and damages elastic straps. Set the spin speed to low or medium so the machine presses out bulk water without flattening the foam shape.
  7. Add an odor-fighting rinse boost. If the gear smells like sour sweat, pour half a cup of plain white distilled vinegar into the fabric softener dispenser drawer before starting the cycle. The mild acid in vinegar neutralizes odor-causing bacteria, cuts through detergent residue, and washes out cleanly during the rinse.

Clean The Hard Plastic Shell By Hand With Disinfectant

While the soft foam liner runs through the washing machine, clean the plastic shell, arch, and harness assembly by hand. The hard shell collects dirt, dried mud, blood, and sweat on both its outer glossy surface and its inner plastic ribs. Hand cleaning protects the structural integrity of the plastic arch while neutralizing harmful bacteria.

  1. Mix a warm soapy cleaning solution. Fill a small bucket with warm tap water and add a few drops of mild grease-cutting dish soap. Dish soap breaks down oily fingerprints and sweat grime without softening or degrading the molded plastic.
  2. Wipe down the entire plastic frame. Dip a microfiber cloth or soft car-wash sponge into the soapy water, squeeze out the excess moisture, and scrub the front arches, back plates, and shoulder caps. Wipe down the webbing straps and plastic adjustment buckles as well. Avoid using stiff wire brushes or abrasive scouring pads, which leave deep micro-scratches where dirt and bacteria can hide.
  3. Scrub the metal rivets and tight hardware crevices. Dip an old, soft toothbrush into the soapy water and work it around every rivet, buckle slot, hinge, and grommet. Dirt, sand, and sweat salts collect beneath these metal studs, leading to rust and stiff joints if you leave them untouched.
  4. Disinfect the shell against bacteria and fungus. Locker room equipment can harbor staph, MRSA, and ringworm fungi. Spray the front and back of the plastic frame with a sports gear disinfectant spray, or wipe the surfaces down using a cloth dampened with a mixture of equal parts water and 70 percent isopropyl rubbing alcohol. Let the disinfectant sit on the surface for two to three minutes to do its job.
  5. Rinse and dry with a clean cloth. Take a second cloth dampened with plain tap water and wipe away all soap and disinfectant residue. Finish by wiping the plastic dry with a clean bath towel, paying close attention to metal rivets and clips to stop surface rust before it starts.

Soak Non-Removable Shoulder Pads In A Bathtub Instead

Many entry-level youth pads and older traditional models feature padding permanently fastened to the plastic arch with metal rivets. You cannot pull the foam out, and you must never put the entire set into the washing machine. For these one-piece sets, a bathtub soak is the safest and most effective deep-cleaning method.

Start by filling your bathtub with four to six inches of lukewarm or cool water. Add a small cap of low-suds HE laundry detergent along with one cup of distilled white vinegar or half a cup of baking soda. Swish the water with your hand until the soap dissolves completely and the water looks slightly sudsy.

Lay the shoulder pads flat into the tub so the water completely submerges the foam padding. Press down on the chest plates and shoulder arches with both hands, forcing water through the foam cells. You will see bubbles rise as trapped air escapes and the soapy water penetrates deep into the padding. Let the gear soak undisturbed for 30 to 45 minutes to dissolve dried salt crystals and soften stubborn body grime.

After the soak, use a soft sponge or washcloth to scrub the high-friction areas around the neck opening, underarm cutouts, and sternum strap. These spots absorb the highest concentration of sweat and need direct agitation to lift embedded grime.

Drain the dirty, gray water from the tub. Turn on the shower head or hold the pads under the running tub faucet to rinse them with cold water. Press your palms firmly against the foam pads, pumping them like a sponge until the water running out of the gear is completely clear and free of soap suds. Leaving soap residue inside the foam can cause severe skin chafing and heat rashes once the player puts the pads back on under a jersey.

Once rinsed, press the pads firmly against the flat bottom or side of the bathtub to squeeze out bulk water. Never twist, wring, or fold the shoulder pads. Wringing bends the plastic arch out of alignment, weakens internal cantilever straps, and permanently wrinkles the protective foam.

Air Dry The Gear Completely Away From Direct Heat

Drying football shoulder pads correctly is just as critical as washing them. Damp foam trapped inside a dark equipment bag creates a breeding ground for mold and mildew. Follow this drying checklist to ensure the padding dries fresh, clean, and intact.

  • Never place any part of the gear in a clothes dryer. The intense heat of a tumble dryer shrinks and warps the plastic shell, melts the glues holding composite padding together, and breaks plastic buckles. Tumbling also damages the inner drum of your dryer.
  • Press excess moisture out with a dry bath towel. Lay the washed foam liner or the entire soaked pad assembly flat on a large, clean bath towel. Roll the towel up over the gear like a sleeping bag, then press down firmly with your knees or hands. The dry towel pulls cups of trapped water out from deep inside the foam layers.
  • Hang the pads on a heavy-duty plastic hanger. Use a thick plastic coat hanger or a specialized sports gear hanger that can support the wet weight without bending. Do not use thin wire hangers, which can bend under the load and gouge into damp foam padding.
  • Keep the gear out of direct, intense sunlight. While fresh outdoor air helps, strong ultraviolet sun rays degrade plastic arches, causing them to turn brittle and crack under hard impacts. Dry your pads indoors or in a covered, shaded outdoor area like a screened porch or carport.
  • Point a box fan directly at the gear. Air circulation is the real secret to fast drying. Position an electric box fan or oscillating fan two feet away from the hanging pads, blowing on high speed directly into the foam side. Constant moving air cuts drying time down to 12 to 24 hours and stops sour smells from developing. Just as you take steps to stop musty odors in your home laundry, constant airflow keeps damp sports foam smelling fresh.
  • Check deep foam seams before storage. Before reattaching the liner to the shell or packing the gear into a gym bag, press your fingers firmly into the thickest padding around the collarbone and shoulders. If the center feels cool, clammy, or damp, keep the fan running for several more hours until the foam is bone-dry all the way through.
4.3
3 ratings
James Patterson
WRITTEN BY
James Patterson
Hi, I'm James, a home appliance nerd hailing from New York City. Armed with my trusty Electrical Engineering degree from MIT and 10 years of experience, I've been helping people navigate the wild world of smart home tech.