Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Wash Faux Leather in a Washing Machine Without Peeling

Prime for Young Adults: check your eligibility on Amazon

A spilled drink down the front of a faux leather jacket or a thrift-store skirt smelling of stale perfume creates an instant laundry panic. Putting the piece in the tub is safe, as long as you use cold water and a gentle wash cycle. Fierce agitation and rough rubbing inside the drum are the real culprits behind flaking and peeled seams.

Success depends entirely on the garment care tag and the specific fabric. Flexible polyurethane (a thin plastic surface over cloth) handles water well, but stiff vinyl materials crack quickly and belong under a damp rag instead. Heat is the greatest risk, so the garment must never enter a heated clothes dryer. Taking a few simple precautions will protect the smooth exterior while clearing away odors and grime.

Checking the Care Tag Before You Wash

Before you toss your garment into the washer, you need to understand what faux leather actually is. Unlike genuine animal hide, synthetic leather is a manufactured sandwich of materials. It usually consists of a soft fabric base, such as cotton, polyester, or rayon, covered with a thin plastic surface. That surface is most often made from polyurethane (often shortened to PU) or polyvinyl chloride (PVC). Polyurethane is flexible, soft, and breathable, so it often tolerates gentle water exposure quite well. PVC is stiffer and glossier, but it contains chemical plasticizers that break down quickly when soaked, leaving the item brittle and cracked.

The care tag tells you whether the manufacturer bonded these layers with a waterproof adhesive or a water-soluble glue. If water dissolves the glue holding the plastic coating to the backing fabric, the top coat bubbles up and peels away in sheets. Checking the tag takes ten seconds and prevents you from ruining an expensive jacket or pair of pants.

Here is a quick checklist to review before you run a load:

  • Confirm the fabric type: Look for polyurethane or PU on the tag. If the label lists PVC, vinyl, or bonded leather, keep it out of the washing machine.
  • Find the wash tub symbol: A simple wash tub icon with water means machine washing is permitted. If you see a hand reaching into the tub, hand-wash only. An "X" over the tub means water washing is forbidden.
  • Check for dry-clean warnings: A single circle indicates dry cleaning. If the tag says "Dry Clean Only," the internal linings, shoulder pads, or interfacing will warp or collapse in water.
  • Examine high-friction areas: Look closely at the collar, underarms, cuffs, and pocket edges. If you spot tiny cracks, peeling edges, or flaking spots, do not machine-wash the item. Machine movement will rip those damaged spots wide open.

Preparing the Garment to Protect the Finish

If the care tag gives you the green light, your next job is shielding the material from physical damage. In a normal wash cycle, clothes rub vigorously against each other and against the stainless steel clothes tub. That friction scuffs the smooth synthetic coating, snags delicate seams, and leaves visible dull marks on shiny finishes. Taking a few minutes to prep the garment keeps the surface smooth.

Follow these steps to prepare your faux leather piece:

  1. Empty every pocket: Check for coins, keys, hairpins, or lip balm. A stray metal key or loose coin tumbling in the tub will gouge deep scratches into the thin plastic surface.
  2. Fasten all hardware: Zip up every zipper completely, snap every button, and fasten any velcro straps. Open metal zipper teeth act like tiny saws against wet synthetic leather. If left loose, they will snag the fabric and leave permanent gashes across the front of your piece.
  3. Turn the garment inside out: This is the most critical preparation step. Turning the garment inside out puts the sensitive synthetic coating on the inside where it cannot rub against the tub walls. It also exposes the cloth lining directly to the wash water. The inner lining is where body sweat, skin oils, and odors gather, so that is the side that needs the soap.
  4. Place the item in a mesh laundry bag: Slide the inside-out garment into a zippered mesh wash bag. The mesh allows water and soap to flow freely while acting as a physical shield against rough friction. If you have a top-load washer with a center agitator post that twists clothes through the water, a mesh bag prevents the sleeves or pant legs from wrapping tightly around the post and stretching out of shape.
  5. Wash with soft, dark items or alone: Never wash faux leather alongside heavy denim jeans, metal-studded items, or rough cotton towels. Heavy wet fabrics drag against the garment and stretch the seams. Wash your faux leather piece alone, or cushion it with a couple of lightweight, dark synthetic shirts.

Dialing in Machine Settings: Water, Cycle, and Soap

The settings you choose on your machine make the difference between a clean garment and a peeling mess. Synthetic leather hates heat and rough movement, so your settings must be gentle from start to finish.

Start with water temperature. You must always wash faux leather in cold water. Hot and warm water soften the thin plastic surface, weakening the chemical bond between the polyurethane film and the fabric backing. Once that bond softens, the swirling water creates bubbles beneath the surface that quickly turn into peeling holes. Cold water cleans the lining while keeping the plastic coating firm and intact.

Next, pick your cycle. Always select the delicate cycle or gentle wash setting. This cycle uses slower wash speeds and gentle rocking motions instead of aggressive churning. It allows the soapy water to clean the fabric without stressing the seams. If your washer offers a quick wash cycle that runs cold, that is another great option because it minimizes the total amount of time the garment spends submerged in water.

Your spin speed also requires special attention. High spin speeds use extreme force to press wet laundry hard against the perforations of the inner wash basket. That intense pressure can imprint permanent waffle patterns or deep creases into the faux leather that you can never smooth out. Turn the spin speed setting down to low or extra-low. If you are washing a bulky jacket in a modern washer, a balanced spin cycle helps distribute the garment evenly along the drum wall, preventing the washer from violently thumping or stopping mid-cycle.

Finally, choose your soap wisely. Pour in a small dose of gentle liquid soap, preferably a low-suds HE (High Efficiency) detergent made for delicates. Never use powdered laundry detergent. Powder grains struggle to dissolve in cold water and easily become trapped inside the folds of the fabric, where they act like fine sandpaper against the smooth plastic surface. Skip liquid fabric softeners, scent beads, and chlorine bleach entirely. Fabric softeners leave a greasy chemical film that suffocates synthetic fabrics, turning faux leather sticky and causing it to break down prematurely. Bleach will discolor the material and strip away the protective coating on contact.

Safe Drying Rules to Avoid Peeling and Melting

The golden rule of faux leather care is simple: never put faux leather into a clothes dryer. Even on the lowest tumble-dry heat setting, the hot air inside a dryer will quickly melt the thin plastic surface, shrink the backing cloth, and warp the entire garment. Tumble drying guarantees bubbling, cracking, and permanent ruin.

Take the garment out of the washing machine the moment the cycle finishes. Letting wet faux leather sit crumpled in the damp inner wash basket encourages stubborn wrinkles and foul mildew smells. Clean washer components help keep damp clothes smelling sweet, which is why a washing machine with a self-cleaning tub is so helpful for keeping musty odors from transferring to your delicates.

To safely dry the piece, start with a clean bath towel. Lay a thick, dry towel flat on a table or counter, place your inside-out garment flat on top, and roll the towel up gently like a sleeping bag. Press down lightly along the roll with your open hands. The dry towel absorbs the heavy excess water without putting any twisting force on the faux leather. Never wring, twist, or squeeze the garment with your hands, because twisting snaps the synthetic fibers and stretches the outer shell out of shape.

After pressing out the standing water, unroll the towel and hang the garment up to air-dry. Use a wide, contoured wooden hanger or a thick plastic hanger. Avoid thin wire hangers, which focus the garment's damp weight onto two small points and create ugly, permanent shoulder dents. Keep the garment inside out until the inner fabric lining feels completely dry to the touch. Once the lining is dry, turn the garment right-side out so the exterior can finish drying in the room air.

Always hang your faux leather in a well-ventilated space away from direct heat sources. Keep it far away from heating vents, radiators, space heaters, and direct sunlight. Strong sunlight and dry radiator heat bake the plasticizers out of the polyurethane coating, leaving the material stiff, brittle, and prone to flaking off the next time you wear it.

When to Spot-Clean or Hand-Wash Instead

Machine washing is the best method for removing heavy body odors from clothing linings, but it is not always the best choice for everyday dirt. Every trip through the washing machine puts a small amount of stress on synthetic seams. If your garment only has a small surface smudge, or if the construction is too delicate for the drum, spot cleaning is much safer.

Never put structured garments into the washer. Tailored blazers, structured faux leather trench coats, items with thick shoulder pads, and motorcycle jackets loaded with heavy metal buckles should never enter a wash tub. The water saturation can crush internal padding, warp stiff collars, and destroy the tailored silhouette permanently. Similarly, if your piece is made of stiff PVC vinyl rather than soft polyurethane, water agitation will cause severe cracking along natural fold lines.

For surface dirt like food drips, mud splatters, or makeup smudges on the exterior, clean the area by hand. Mix a cup of room-temperature water with two drops of mild liquid dish soap or baby shampoo in a small bowl. Dip a soft microfiber cloth into the soapy mix and squeeze it out until it is barely damp. Gently wipe the stained area in small, circular motions. Never scrub hard with rough sponges or stiff brushes, as aggressive rubbing can peel the color right off the backing fabric. Wipe the area again with a second cloth dampened with plain water to remove any soap residue, then pat it completely dry with a clean towel.

If your faux leather jacket smells like smoke or sweat but the exterior is clean, you can freshen the lining without washing the whole piece. Turn the jacket inside out and hang it in a bathroom while taking a hot shower so the gentle steam relaxes the lining. You can also lightly mist the fabric lining with a 50/50 mixture of distilled white vinegar and cold water from a spray bottle. The vinegar kills odor-causing bacteria and disappears as it dries, leaving the lining fresh without getting the outer synthetic leather wet.

FAQs

Can you wash faux leather pants or leggings in the washing machine?

You can wash faux leather pants or leggings in the machine only if the inner care tag permits water washing and they are made from flexible polyurethane. Always turn the pants inside out to protect the glossy surface, place them in a mesh wash bag, and run a cold, delicate cycle with mild liquid soap. Hang them by the waistband or lay them flat on a drying rack to air-dry, and never place them in a heated dryer.

What should you do if your faux leather has a strong fishy or chemical smell?

A fishy smell is a common byproduct of the chemical treatments and synthetic polymers used during the manufacturing of faux leather. You can eliminate this smell by turning the garment inside out and hanging it in an airy, shaded outdoor space or a room with open windows for a day or two. If the smell persists, lightly mist the cloth lining with equal parts distilled white vinegar and water, or place the item in a sealed garment bag with an open box of baking soda for 48 hours to absorb the fumes.

Can you use genuine leather conditioner or oils on faux leather after washing?

You should never use standard leather conditioners, mink oil, or saddle soap on faux leather. Genuine leather is porous animal hide that drinks in natural oils, but faux leather is sealed plastic that cannot absorb oil-based conditioners. Applying leather conditioner leaves a greasy, sticky film on the surface that attracts dirt, clogs the material, and causes the synthetic coating to soften and peel over time. To restore shine, wipe the clean surface with a damp microfiber cloth or use a specialized synthetic leather protectant spray.

4
2 ratings
Cody Rayburn
WRITTEN BY
Cody Rayburn
Cody is a home appliances editor based in Portland, Oregon. She specializes in eco-friendly and sustainable home appliances. With a decade of experience in the field, Cody is known for her comprehensive reviews and guides that focus on the environmental impact of appliances.