How to Get Rid of Washing Machine Mold Smell
Clearing out that sour mildew smell takes a hot empty cycle with bleach or a washing machine cleaner tablet, followed by wiping away trapped grime. The exact routine changes depending on where the damp muck hides inside the cabinet. Water and leftover soap easily turn into a slick, smelly buildup that clings to dark corners. Running hot water loosens that gunk, but scrubbing the parts that stay wet is what stops the stench for good.
Front-load washers usually trap dirty moisture inside the thick folds of the rubber door seal, while top-load machines tend to collect scum along the upper rim of the drum. A clogged drain filter at the bottom of the machine can also hold stagnant, foul water. Heavy use of liquid fabric softener makes things worse by leaving a sticky film that feeds fresh mildew. Here is how to flush out the buildup and keep every load of laundry smelling clean.
Where Washer Mold Hides and Why It Smells
Washing machine mold does not happen because your home is dirty. It happens because modern laundry routines create an ideal environment for fungus to thrive. Decades ago, washers ran on scorching hot water and aggressive detergents. Today, most households wash everyday clothes in cold or lukewarm water to save electricity and protect delicate fabrics. While cold water is great for your utility bills, it fails to dissolve body oils, skin cells, and thick laundry detergents. Over time, these leftovers combine with minerals in your tap water to create slimy soap scum and mold across internal surfaces you cannot readily see.
Your machine also holds onto moisture. The wash tub is an enclosed, dark box that stays warm and humid for hours after a cycle finishes. When you close the door immediately after transferring wet clothes to the dryer, you trap that moisture inside. Airborne mold spores settle onto the damp soap residue and multiply into thick colonies, releasing the musty, sour odor that clings to your clean towels and shirts.
Where the mold settles depends heavily on the design of your appliance. In front-loaders, water and lint gather inside the deep folds of the rubber door seal, while airtight door gaskets seal in the dampness. Top-loaders rarely suffer from door seal mold, but they hide thick layers of grime underneath the plastic splash rim at the top of the wash tub, as well as beneath the center agitator post that twists clothes through the water. If you are weighing the maintenance needs of different machine styles, looking at how top or front load washing machines manage moisture can help you pick the right fit for your home.
How to Clean Washing Machine Mold Smell Step by Step
Eliminating stubborn washer odor requires a two-part attack: breaking down the greasy film hiding inside the hidden plumbing lines, and wiping away the fungal colonies taking root on accessible rubber and plastic parts. Follow these steps in order to reset your machine to a fresh state.
- Empty the stainless steel clothes tub completely. Check the drum thoroughly for stray socks, baby clothes, or loose washcloths left behind from previous loads.
Reason: Any fabric left inside the tub will soak up the concentrated cleaning agent and prevent the hot chemical wash from reaching every part of the drum surface. - Add your cleaning agent directly to the wash basket. Place a dedicated washing machine cleaner tablet into the bottom of the empty drum, or pour one cup of liquid chlorine bleach directly into the main wash compartment.
Reason: Specially formulated washing machine cleaners dissolve slowly to scour away hardened detergent layers, while bleach acts as a fast sanitizer to kill living fungal spores on contact. Safety note: Never mix chlorine bleach with vinegar, ammonia, or any acid-based cleaner, because combining them releases toxic chlorine gas that can cause severe breathing injuries. - Select the hottest cycle available on your machine. Turn the dial to the dedicated tub-clean cycle, sanitize setting, or a normal heavy-duty cycle with the water temperature set to hot, and let it run to completion.
Reason: Boiling-hot water melts greasy fabric softener buildup and activates the chemical ingredients so they can break apart fungal colonies deep inside the drain pipes. - Peel back and wipe down the rubber door seal. Once the wash cycle finishes, open the door, pull back the rubber folds with your fingers, and wipe away all trapped black residue using a microfiber towel dipped in warm water and mild dish soap.
Reason: The high-heat cycle loosens internal slime, but physical friction is necessary to lift the stubborn mildew clinging to the damp lower folds of the rubber. - Remove and scrub the soap tray. Press the release tab located inside the dispenser housing, pull the soap tray out completely, and scrub away dried detergent and black spots in your sink using warm water and an old toothbrush.
Reason: Liquid detergent and fabric softener stagnate inside the dispenser channels, creating a thick gel where mold grows right above the clean water inlet. - Unclog and drain the lower drain filter. Open the small access door at the base of your machine, drain the standing water into a shallow dish, and unscrew the filter screen to remove lint, hair, and trapped debris.
Reason: The drain filter traps lint and foreign objects, but stagnant water held in the pump housing turns putrid between washes and pushes foul odors right back into the drum. - Run a final hot rinse and spin cycle. Close the drain filter hatch, close the door, and run an empty quick wash or rinse cycle using hot water without adding any soap or chemicals.
Reason: A fresh water rinse flushes out loosened slime flakes and chemical residue so your next batch of laundry comes out smelling clean.
Scrubbing the Manual Trouble Spots
Running a cleaning cycle clears the hidden pipes, but manual trouble spots require hands-on scrubbing to keep the smell from returning. On front-load washers, the rubber door seal requires the most attention. Pull the outer rubber lip toward you and inspect the bottom basin where the rubber meets the metal drum. You will likely find a layer of gray or black slime, along with trapped coins, hairpins, and hair. Dip a soft rag into a mixture of warm water and liquid dish soap, or a mild bleach solution made of one quarter cup of bleach per quart of water. Wipe every crevice thoroughly. Look for the tiny drainage weep holes along the bottom crease of the rubber and poke them clear with a cotton swab so trapped water can drain freely.
The soap tray is another primary breeding ground for fungal growth. Most people do not realize that the dispenser drawer slides out entirely. Press the small plastic tab (usually marked with a push symbol in the fabric softener pocket) and pull the drawer straight out. Rinse the tray under warm running water, using an old toothbrush to clean the underside of the siphon caps. Before sliding the tray back in, shine a flashlight into the empty cavity on the machine. You will often see black mold dots clinging to the ceiling of the compartment where the water jets spray down. Spray the cavity with warm soapy water and wipe it clean with a rag or a long-handled bottle brush.
If you own a top-loader, focus your scrubbing on the upper splash rim. As the inner wash basket spins, soapy water sloshes against the underside of the plastic tub ring, leaving behind a crust of lint and soap scum. Wipe around and under this rim using a damp cloth. If your washer has a removable fabric softener dispenser cap on top of the center agitator post, pull it off and soak it in hot water to dissolve the waxy buildup trapped underneath.
Emptying the Lower Drain Filter and Trap
Modern front-load washers feature a small drain filter (often called a coin trap) hidden behind an access panel on the lower front corner of the cabinet. This filter catches pet hair, lint, coins, and loose buttons before they can jam the drain pump. However, this chamber constantly holds a cup or two of stagnant water. When organic lint sits submerged in warm water for weeks, it rots, producing a strong sulfur or sewer gas smell that travels back into the drum. Emptying this filter every two to three months stops foul odors at the source.
- Protect your flooring: Place an old towel and a shallow baking pan directly beneath the lower access door, as water will spill out when you open the chamber.
- Drain the resting water: Open the access door and unclip the small black rubber emergency drain hose. Pull the stopper plug out and let the dirty water drain completely into your shallow pan before resealing the hose.
- Unscrew the filter plug: Turn the large round filter knob counter-clockwise slowly. Have a towel pressed against the opening to catch any residual water that trickles out.
- Clear the debris screen: Pull the cylindrical plastic filter screen out of the housing. Peel away the mat of lint, hair, and foreign objects, then rinse the screen clean under hot tap water in your sink.
- Inspect the pump chamber: Shine a flashlight into the empty pump cavity to verify that no coins or hairpins are jamming the small plastic pump impeller blades at the back of the chamber.
- Reinstall securely: Slide the filter back in and twist it clockwise until it stops firmly. If the filter is cross-threaded or loose, water will leak across your laundry room floor during the next spin cycle.
Daily Habits That Stop Washer Mold Before It Starts
Once you clear out the sour smell, simple daily adjustments will prevent new mold colonies from taking root. Mold requires moisture, warmth, and food to survive. If you remove any of these three elements, the smell cannot return.
- Keep the door cracked open: Always leave the washer door or lid open two to three inches between loads. Allowing fresh air to circulate dries out the stainless steel clothes tub and evaporates moisture trapped behind the rubber door seal.
- Use low-suds HE (High Efficiency) detergent correctly: Measure your detergent carefully rather than guessing. Standard washers used large quantities of water, but high-efficiency machines use very little. Excess soap cannot rinse away; it coats the outer tub walls and feeds hungry mold colonies. Two tablespoons of liquid detergent is plenty for an average laundry load.
- Switch from liquid softener to white vinegar: Liquid fabric softeners use petroleum derivatives and animal fats to coat clothing fibers, creating a greasy film inside your washer drum that acts as mold food. Pouring plain distilled white vinegar into the softener compartment softens clothes naturally and rinses away cleanly without leaving behind sticky residue.
- Run hot wash cycles regularly: Washing everything on cold lets bacteria multiply unchecked. Run at least one load of white towels, bed linens, or cotton rags each week on the hottest water setting with bleach or oxygen-based cleaner to flush the lines naturally.
- Wipe the rubber folds dry: Keep a dedicated hand towel near the machine. At the end of laundry day, spend ten seconds wiping moisture from the bottom fold of the rubber door seal and the inside of the door glass.
- Keep up with automated maintenance: A washing machine with a self-cleaning tub can notify you when it is time to run a dedicated sanitizing cycle, making long-term upkeep straightforward.
What to Look for in a Washer That Fights Mildew
If your current washing machine is older, damaged, or constantly fighting stubborn mildew despite repeated scrubbings, you may want to evaluate modern moisture-resistant designs. Newer laundry appliances incorporate hardware upgrades specifically engineered to tackle stagnant moisture and soap buildup.
When shopping for a replacement, look for models with built-in antimicrobial door seals. These rubber compounds are treated during manufacturing to resist fungal growth and prevent black mold stains from sinking deep into the rubber pores. Another practical feature is a magnetic door plunger or vented latch, which holds the washer door slightly ajar when the machine is turned off without letting the door swing wide open into your walkway.
Look for machines equipped with internal water heaters capable of true sanitizing temperatures, as standard hot tap water often cools down too quickly to kill mold spores effectively. Some modern units also feature internal air circulation fans that draw fresh room air through the drum after a cycle finishes to dry out the interior automatically. Choosing a washing machine that prevents mold can eliminate routine manual scrubbing and protect your clothing from persistent sour odors for years to come.
- TAR Score9.5
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandSeventh Generation
- TAR Score8.4
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandHomChum
- TAR Score8.3
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandBayes
- TAR Score7.9
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandTHE CLEAN PEOPLE
- TAR Score7.5
TAR Score is a ranking system developed by TopAppliancesReviews.com. TAR score has no relationship or impact from any manufacturers or sales agent websites. Learn more
- BrandTrue Fresh
Last update on 2026-10-30 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API
FAQs
Why does my washing machine smell like rotten eggs?
A rotten egg smell usually points to bacteria decomposing trapped lint, hair, and soap scum inside the stagnant water of the lower drain pump filter. In rare cases, this odor can stem from a dry sewer standpipe trap behind the washer, which allows sewer gas to seep upward into your laundry room. Drain the lower pump filter first, and pour a gallon of water down your wall drain pipe to ensure the plumbing trap is full.
Can I use vinegar and baking soda to remove washing machine mold smell?
Vinegar and baking soda can help refresh a mildly dirty washer, but they are not strong enough to eradicate established black mold colonies. Furthermore, combining them in the drum neutralizes their cleaning power, producing basic saltwater and carbon dioxide gas. For persistent mold odors, use a dedicated washing machine cleaner tablet or liquid chlorine bleach on a hot cycle to kill spores and break down greasy film.
How often should I clean my washing machine to keep mold away?
Run a dedicated hot cleaning cycle with a cleaning tablet once every month, or roughly every thirty wash cycles. If your household does multiple loads of sports gear, muddy work clothes, or cloth diapers every week, clean the machine twice a month. You should also remove and rinse the soap tray and drain the lower coin trap filter every two to three months.
Will running bleach through my washer damage the rubber parts?
Occasional use of liquid chlorine bleach on an empty hot maintenance cycle will not harm the rubber door seal or internal hoses. Modern washers are designed to tolerate dilute bleach for routine stain removal and tub sanitation. However, you should avoid using straight, undiluted bleach directly on rubber components for extended periods, and always run a clear water rinse cycle afterward to flush away chemical residues.


























