How to Clean a Speed Queen Washing Machine to Stop Odors
A freshly washed pile of bath towels comes out of the drum smelling faintly sour instead of clean. The quickest way to clear out that stale odor is running an empty hot-water cycle with liquid chlorine bleach or a tub-cleaning tablet, then wiping down the dispensers and rim with warm soapy water. That single wash loosens hidden detergent film and flushes out trapped grime before it can cling to your next load of clothes.
The exact routine shifts slightly depending on how the washer is built. Top-load models with a tall center post need extra attention around the fabric softener cup and the top rim of the tub. Front-load units tend to collect damp residue inside the flexible rubber door seal. Older dials just need the hottest, longest regular setting, while newer panels might offer a built-in clean cycle. Here is how to scrub out the buildup safely without scratching the steel drum.
How to Run a Deep Drum Wash with Bleach or Washing Machine Tablets
Speed Queen washers are famous for heavy-duty metal parts and long lifespans, but even a commercial-grade machine can develop foul smells over time. Modern wash habits cause most of this trouble. Washing every load in cold water saves energy, but cold water cannot dissolve body oils, skin flakes, and laundry detergent additives. Over several months, these leftovers form a slick film behind the stainless steel clothes tub. Mold and bacteria thrive in that dark, damp space, which leaves clean clothes smelling sour or musty.
Running a dedicated sanitizing wash burns off that slimy film and kills odor-causing bacteria before it spreads to your clothing. You do not need expensive specialty tools to do this. A simple cycle using regular liquid chlorine bleach or a commercial washer cleaning tablet will do the heavy lifting.
- Clear the wash tub completely. Check the bottom of the stainless steel clothes tub for stray socks, baby clothes, or coins that might be stuck against the metal walls. The tub must be completely empty so the cleaning solution can splash against every surface.
- Choose your cleaning chemical. You have two strong choices for a drum clean. You can pour one cup (8 fluid ounces) of regular liquid chlorine bleach directly into the empty wash tub, or drop one washing machine cleaner tablet onto the bottom of the drum. Bleach is the best choice for mold spores and sour mildew. Cleaning tablets contain oxygen-based oxidizers and citric acid, which work better for dissolving hard water mineral crust and leftover detergent film.
- Select the hottest cycle available. Turn the water temperature dial to Hot. If your Speed Queen has an electronic touch panel with a dedicated Tub Clean cycle, choose that setting. If your model uses classic mechanical knobs, select the Heavy Duty cycle with the largest load size setting so the machine fills with as much hot water as possible.
- Let the cycle run its course. Start the machine and let it fill, agitate, drain, and spin. If you have an older top-load model with a mechanical timer, you can let the tub fill with hot bleach water, allow it to agitate for two minutes to mix the solution, and then pull out the timer knob or lift the lid to pause the cycle. Letting the hot bleach water soak in the tub for 30 to 60 minutes gives it extra time to eat away thick grime behind the drum walls.
- Run a clean water rinse. Once the wash cycle finishes, open the lid and take a quick sniff. If you smell strong chemical fumes or see loosened soap scum floating near the drain holes, run one more quick wash or rinse cycle using hot water and no soap. This flushes away any loosened residue so it never touches your everyday laundry.
Deep Cleaning Top-Load Speed Queen Washers and Dispensers
Top-load Speed Queen models rely on a center agitator post that twists clothes through the water to pull dirt out of fabric. Because top-loaders use a high volume of water, detergent suds splash up high against the inner cabinet. That splashing action leaves behind a ring of dried soap scum and lint above the normal water line where fresh water never rinses it away.
You can clean these hidden spots without taking the machine apart. Never try to unscrew the bottom bolt to pull the center post off the drive shaft. Removing the post is unnecessary for normal cleaning and can damage the plastic splines or drop small washers down into the sealed transmission housing. Instead, focus on the fabric softener cup and the upper tub ring.
- Remove the fabric softener dispenser cup. The fabric softener dispenser sits on top of the center agitator post. Liquid softener is thick and waxy, and over time it turns into a black, sticky jelly inside that cup cavity. Grab the base of the cup firmly and pull straight up toward the ceiling. On most models, the cup snaps free with moderate hand pressure.
- Scrub the dispenser parts in the sink. Take the dispenser to your kitchen or utility sink. Separate the inner funnel from the outer ring if your model uses a two-piece cup. Soak the pieces in a basin of hot water mixed with a few drops of liquid dish soap for fifteen minutes. Use an old toothbrush or a soft bottle brush to scrub away the black softened wax from the inside corners and drain channels. Rinse the plastic thoroughly under warm running water.
- Flush the top cavity of the center post. Look down into the open hole at the top of the center agitator post where the dispenser was sitting. You will often see leftover softener slime clinging to the inner plastic walls. Pour two cups of warm water mixed with mild dish soap down into that opening to flush the loose debris down toward the drain pump.
- Scrub the outer tub rim and splash guard. Open the washer lid wide. Look right below the metal top opening at the plastic balance ring sitting on top of the clothes tub. This ring catches soapy lint every time the machine spins. Dip a microfiber cloth into warm, soapy water and wipe all the way around the rim, the underside of the lid, and the top metal lip of the washer cabinet.
- Snap the clean dispenser back into place. Line up the fabric softener cup over the center agitator post and push straight down until you feel it seat securely. Wipe the outside of the center post fins with your damp cloth to remove any stray soap marks.
Cleaning Front-Load Speed Queen Models and Door Gaskets
Front-load Speed Queen machines clean laundry with exceptional efficiency, but their horizontal layout creates unique places for water to collect. When comparing how top-load and front-load washing machines handle moisture, front-loaders require a bit more attention around the door opening. A front-loader relies on a watertight door to keep dozens of gallons of water off your floor, and that watertight seal can easily trap mold.
The primary trouble spot is the door boot, which is the flexible rubber ring sealing the door against the metal frame. Every time you wash a load, stray hair, lint, and soapy wash water collect in the rubber folds at the bottom of the opening. If you leave that moisture trapped behind the dark seal, thick black mildew spots will grow within a few weeks.
- Inspect and clear the rubber door ring. Open the door fully. Use your fingers to gently peel back the thick rubber folds of the flexible ring at the bottom of the opening. Look closely inside the fold for trapped coins, hairpins, pet hair, and lint. Pull out any solid objects by hand so they do not poke a hole in the rubber or block the tiny drainage holes molded into the bottom of the ring.
- Wipe out mold and detergent slime. Mix a simple cleaning solution of two cups warm water and two tablespoons of liquid chlorine bleach in a small bowl. Dip a soft rag into the mixture, wring it out until damp, and wipe deep inside every fold of the rubber ring. Rub away any black mold spots clinging to the rubber. If the mildew has stained the surface, let the damp bleach cloth sit directly against the stain for ten minutes before wiping it clean.
- Clean the inner glass door. Soap scum, fabric softener, and body oils form a hazy film on the smooth glass inner door surface. Wipe the entire glass bowl using warm water and a drop of dish soap, then dry it with a clean towel. A clean glass face ensures the rubber door ring can seal tightly without leaking during heavy wash cycles.
- Wash the pull-out detergent drawer. Pull the detergent drawer forward until it stops. Look for a small plastic release tab, usually marked with a small arrow or the word PUSH, located in the fabric softener compartment. Press down on that tab with your thumb and slide the drawer completely out of the machine cabinet. Rinse away hardened soap residue under hot tap water.
- Clean the drawer housing ceiling. Before you put the drawer back, shine a flashlight inside the empty slot in the washer cabinet. The ceiling of this cavity contains tiny water spray holes that flush detergent into the tub. Mold and crusty powder often build up around these holes. Scrub the ceiling of the slot with an old toothbrush dipped in warm water, then slide the clean dispenser drawer back into its track until it clicks.
Choosing Safe Cleaners and Daily Habits to Keep Odors Away
Keeping your washing machine fresh does not require harsh industrial chemicals. In fact, using the wrong products can ruin the finish on your machine or create serious health hazards in your laundry room. Sticking to tested cleaning agents and simple daily habits will keep your Speed Queen running like new without damaging any internal parts.
Liquid chlorine bleach is the most effective tool for destroying living mold spores, mildew, and persistent bacteria. It breaks down the cell walls of organic matter and leaves the drum sanitized. Dedicated washer cleaning tablets are your best option if your water supply has heavy mineral content, because their concentrated citric acid breaks up limestone scale and soap curd that bleach cannot dissolve.
Never mix liquid chlorine bleach and white vinegar together under any circumstances. Combining bleach with any acid, including vinegar or ammonia, causes a rapid chemical reaction that releases toxic chloramine or chlorine gas. Breathing these fumes causes severe coughing, burning in your eyes, throat irritation, and lung damage. If you prefer using white vinegar to remove mineral buildup, run your vinegar cycle on a completely different day, or run two full cycles of plain hot water through the machine between a bleach wash and a vinegar wash.
You should also avoid using thick, petroleum-based or animal-fat-based liquid fabric softeners. These liquids coat the outside of the stainless steel wash basket in a waxy shell that traps dirt and provides constant food for mildew. Switching to wool dryer balls in your dryer, or pouring two tablespoons of distilled white vinegar into the softener dispenser cup during normal laundry loads, softens fabrics naturally without creating slimy drum buildup.
Building a few simple preventative steps into your weekly routine will prevent sour odors from ever getting a foothold inside the tub:
- Leave the washer lid or door propped open two to three inches between loads so air circulates and dries out the drum.
- Use low-suds HE (High Efficiency) detergent and measure carefully, keeping the amount to two level tablespoons or less per load.
- Switch at least one load per week to hot water, such as white bath towels or bed sheets, to naturally flush away cold-water grease.
- Wipe the rubber door seal on front-load models with a dry hand towel after finishing your final load of the day.
- Clean the lint screen or pump catch area twice a year to ensure dirty rinse water drains quickly without backing up.
If you clean the tub, scrub the rubber seals, and flush the dispensers, but still notice a rotten-egg or stagnant sewer smell, the issue is likely outside the washer drum. Check behind the machine to confirm the flexible drain hose does not sit too deep inside the household standpipe. A drain hose pushed more than six to eight inches down the pipe can siphon dirty sewer water back into your machine. If adjusting the hose and running another hot cycle does not solve the smell, call a licensed plumber to inspect your household drain vents for blockages.
FAQs
How often should I clean my Speed Queen washing machine?
You should run a hot sanitizing wash with bleach or a cleaning tablet once every month if you do laundry several times a week. If you wash mostly in cold water or run lots of muddy work clothes, clean the tub every three weeks. Wiping down the dispensers and door seals takes only a minute and should be done every couple of weeks.
Can I use vinegar to clean my Speed Queen washer?
Yes, distilled white vinegar works well to cut through hard water mineral scale and light soap scum inside the drum. Pour two cups of white vinegar into the empty tub and run a hot cycle with a soak period. Just remember to never mix vinegar with chlorine bleach, and do not use vinegar on every single load because continuous acid exposure can degrade rubber gaskets over time.
Why does my Speed Queen smell bad even after running a clean cycle?
A lingering odor usually means grime is hiding in a spot the wash water could not reach, such as inside the fabric softener cup or deep within the folds of the front-load door boot. Another common cause is built-up lint and slime sitting at the bottom of the drain pump filter. Remove the dispensers to scrub them by hand, wipe inside all rubber folds, and verify your drain hose is not siphoning sewer gas from the wall pipe.
Related guides: how to clean a speed queen washer.





















