Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Much Water Does a Washing Machine Use?

Prime for Young Adults: check your eligibility on Amazon

Start with the washer’s manual or the manufacturer’s product information to find its water-use figure. There’s no single amount that applies to every washing machine, because the amount depends on the model and how you use it.

A compact washer may use a different amount from a full-size machine, and the clothes in one wash and the selected setting can change how much water it draws. A larger load, a higher water-level setting, or an added rinse may use more. The machine’s age and condition can matter, too. Here’s how to find your washer’s figure and check what could be changing it.

Why washer water use changes from one load to the next

A washing machine doesn’t use the same amount of water for every wash. The amount depends on the washer’s design, the clothes in the basket, and the wash setting you choose. That’s why a figure from a neighbor’s washer may not match yours, even if both machines look similar.

Some washers add water based on the load, while others let you choose a water level. The machine may also use different amounts during washing and rinsing. An extra rinse adds another step, so it can use more water than the same wash without that option.

Age and condition can matter, too. A machine that isn’t draining as it should may run differently, and a leak can send water down the drain or onto the floor without cleaning any clothes. Before assuming the washer is using too much, check the settings and look around the machine for signs of a leak.

For a useful comparison, look for information about the same washer model and a similar load and wash setting. A number from a different cycle or machine may not tell you much about your usual laundry routine. Your manual or the manufacturer’s information is the best place to find a figure for your specific washer.

How washer type and load size affect water use

Top-load and front-load washers handle clothes differently, so one general rule won’t give you the water use for every machine. Many front-loaders wash clothes by lifting and tumbling them through a smaller amount of water. Many top-loaders use water to move clothes around the tub, but water use varies among models and settings.

That difference doesn’t mean every top-loader uses more than every front-loader. A newer top-loader may use water differently from an older one, and a compact washer may use less water per load simply because it holds fewer clothes. To compare fairly, check the figures for the exact models and the same type of wash.

A small load may use less water when a washer senses the amount of laundry and adjusts the fill. But a washer with manual water-level choices may not lower the water automatically. If you wash a few items, choose a suitable lower level if your machine offers one, and follow the manual’s instructions.

Don’t pack clothes tightly to make fewer loads. Clothes need room to move through the water and rinse clean. A stuffed basket can leave detergent or dirt behind, which may lead you to wash the clothes again and use more water overall.

Bulky items can also change what happens. A blanket or a few heavy towels may take up space and shift to one side, so the washer may pause or use a different pattern to move the load. Use the cycle recommended for the item, and check the manual if you’re unsure whether it belongs in your machine.

How to find your washer’s water-use figure

Use these steps to find a model-specific figure instead of relying on a broad estimate.

  1. Find the model name or number. Look at the label on the washer, often around the lid, door opening, or back of the machine. If you can’t find it, check the paperwork that came with the washer or ask your landlord or property manager.

  2. Check the manual. Look in the operating information for water use, water consumption, or cycle details. If the manual lists figures by wash setting, note which setting matches the way you usually do laundry.

  3. Look at the manufacturer’s product information. Search using the full model name or number, then check that the information matches your exact washer. Similar names can refer to different versions, so don’t use a figure from a machine that only looks like yours.

  4. Check what the figure describes. See whether it applies to one wash, a particular setting, or another stated condition. If the information doesn’t explain the conditions, contact the manufacturer and ask what the figure covers.

  5. Keep the comparison consistent. Use the same wash setting and a similar load when comparing information. A figure for a heavy-duty wash with an extra rinse may not match a small everyday load on a shorter setting.

If you can’t find a water-use figure, don’t treat that as proof the washer is using too much. Ask the manufacturer for model-specific information, or check the manual that came with the appliance. A water bill can show that your household’s use changed, but it usually can’t identify how much came from one washer cycle.

If you’re comparing washers because your current one seems unreliable, use the model-specific information rather than guessing from its style. You can also read about what to consider when looking for a reliable washing machine, but reliability information won’t replace a water-use figure for your exact model.

Settings that can change how much water a wash uses

Before changing how you do laundry, check the controls you already use. A setting that adds water or repeats part of the wash can make one load use more than your usual wash.

  • Extra rinse: This adds a rinse after the regular wash and rinse. Use it when you need it, such as when the care instructions or your washing needs call for an added rinse, but don’t leave it on by accident.

  • Water level: If you choose the level yourself, match it to the amount of laundry and follow the manual. A high setting for a few items can use more than a lower setting suited to that load.

  • Wash setting: Different settings may use water in different ways or take different steps. Check the manual to learn what your machine does on quick, delicate, or heavy-duty settings rather than assuming one always uses less.

  • Load size: Use a load that fits the washer’s guidance. Very small loads may not use less water on every machine, while an overfilled basket can leave clothes poorly washed or rinsed.

  • Repeat washes: If clothes come out with soap or dirt still on them, you may end up washing them again. Use the detergent amount and type named in your manual, and avoid adding an extra rinse by habit if it isn’t needed.

Make one change at a time if you’re trying to understand your routine. For example, turn off an extra rinse you don’t need, then use the same kind of load and setting as usual. Changing the load, detergent, and wash setting together makes it harder to tell which change affected the result.

What to check if water use seems unusually high

If your water bill rises suddenly, first look for a visible leak. Stop using the washer if water is spilling onto the floor, and turn off its water shutoff valves if you can reach them safely. Keep away from wet electrical plugs or outlets, and contact your landlord, a plumber, or an appliance repair professional if you can’t stop the leak safely.

If there’s no leak, check the washer before arranging a repair. These simple checks can help distinguish a setting issue from a problem that needs professional attention.

  • Look at the selected settings. Check whether extra rinse or a higher water level is on. Return the controls to the setting you intended, following the manual.

  • Watch the hoses during a wash. Look for drips around the hot and cold water supply hoses and where the drain hose empties. Don’t pull hoses loose or reach behind a running washer.

  • Check for water after the wash. Look around the base of the machine and the floor nearby. A damp patch, a puddle, or water that keeps appearing deserves attention, even if the clothes wash normally.

  • Notice whether the washer keeps filling or draining. If water continues to run when the machine should be finished, or the washer repeatedly starts filling again, stop the cycle and follow the manual’s shutoff instructions.

  • Compare your routine. Think about whether you’ve added extra rinses, changed the load size, or started washing more often. A change in household laundry habits can raise total water use without a fault in the washer.

Call a qualified repair professional if the washer continues filling or draining unexpectedly, a hose connection keeps leaking, or you can’t identify the source of water on the floor. Don’t open the machine or work on its electrical parts. If you rent, report the problem to your landlord or property manager promptly.

A water bill covers more than laundry, so a higher bill by itself doesn’t prove the washer is at fault. Check for other changes in household water use, such as a running toilet or a dripping faucet. If you suspect a hidden leak or can’t tell where the water is going, ask a qualified plumber for help.

FAQs

Does a top-loader use more water than a front-loader?

It depends on the models and settings being compared. Many front-loaders use a different washing action from top-loaders, but washer style alone can’t tell you the water use of your exact machine. Compare the manufacturer’s information for the specific models and similar wash settings.

Do small loads use less water?

Some washers adjust the water for a smaller load, while others may use a water level you select. Follow your manual and choose a suitable lower level if your machine offers one. Don’t cram a load full to avoid another wash, because clothes still need room to move and rinse.

Could an extra rinse or a leak be using more water?

Yes. An extra rinse adds another rinse step, and a leak can waste water without washing clothes. Check the settings and look around the hoses, drain area, and floor; stop using the washer and call for help if water is leaking or the machine keeps filling unexpectedly.

4.5
2 ratings
Betty Smith
WRITTEN BY
Betty Smith
On a rainy Seattle day, you might find Betty Smith, our female home appliances editor, tinkering with her latest gadget. With a degree in Mechanical Engineering and 15 years of experience, Betty crafts practical tips and DIY repair guides that have resonated with readers nationwide.