How Much Water Does a Washing Machine Use?
There’s usually no need to worry about a single wash, but there isn’t one water amount that fits every washing machine. Water use varies by machine, load size, and wash setting, so the manual or manufacturer’s details are the best place to find the amount for your own washer.
A washer designed to use less water may use a different amount than another design. A fuller load can use more than a small one, and some settings add extra rinses, which use more water. To understand what laundry may add to your water bill, start with the figure for your washer and the cycles you normally choose. Here’s how to find that figure and make a useful estimate.
Why water use changes from one wash to another
A washer’s water use depends on its design, the amount of laundry inside, and the wash setting. That is why one number cannot describe every load, even when the same household uses the same machine. A light load on a quick setting may use a different amount from a full load with an extra rinse.
Washer design matters, too. A high-efficiency washer is designed to clean clothes with less water and energy than older or less efficient designs. But the label alone does not tell you exactly how much a particular load uses. The model’s stated figure and the way you use it are more useful for estimating your water bill.
Load size can affect how a washer fills and runs. Some machines adjust the water level to the laundry inside. Others use set fill levels for certain settings. A small load may use less water in a machine that adjusts its fill, but it may not use proportionally less in every washer.
A full tub is not always the best way to save water. Clothes need room to move through the water and wash properly. Follow the fill guidance in your manual, and avoid packing clothes tightly to the top. An overloaded washer can leave items poorly cleaned, which may lead to another wash and use more water overall.
The wash setting also changes the amount. A heavy-duty cycle may run differently from a quick wash or delicate cycle. An extra rinse adds another part that washes soap from clothes, so it can increase water use. The exact change depends on the washer and setting.
Compare machines, loads, and wash settings fairly
To compare two washers, look for water use stated for the same kind of cycle and load. A number for one cycle may not describe every setting. If one machine’s figure includes an extra rinse and another’s does not, the comparison can mislead you.
Portable washers do not automatically use less water than regular household washers. Their size and design vary, and the word “portable” does not give you a water-use figure. Check the manual or manufacturer’s details for the exact model, and look for a stated amount per cycle rather than guessing from the machine’s size.
When comparing your own loads, keep the conditions similar. For example, compare a usual load washed on the same setting, with the same rinse options. If you switch from a small quick wash to a larger load with an extra rinse, any change in water use could come from more than one factor.
Think about what you actually wash in a normal week. A household that often washes bulky towels or chooses extra rinses may use a different amount from one that mostly washes lightly soiled clothes on a regular setting. The washer’s stated figure is a starting point, not a promise that every cycle will match it.
If you are comparing machines before replacing one, check whether each manufacturer gives water use for a cycle and explains how it is measured. Also confirm that you are comparing similar wash settings. For other factors to consider when replacing a washer, see what to look for in a reliable washing machine.
Where to find your washer’s water-use figure
Start with the manual for the exact model. Search the pages for “water use,” “water consumption,” or a cycle chart. If you no longer have the paper manual, look up the model on the manufacturer’s website. The model name or number is usually printed on a label attached to the washer, often around the lid, door opening, or back.
Check the manufacturer’s product details as well. Look for an amount per cycle and read the note beside it. It may apply to a particular setting, load, or measurement method, so don’t assume it covers every wash. If the page gives only broad efficiency information, it may not provide the exact amount you need for a household estimate.
Use this short checklist when you look:
- Match the model: Make sure the manual or product page is for your exact washer, not a similar model.
- Find the unit: Note whether the amount is given per cycle or in another form.
- Check the setting: See which wash setting and rinse options the figure describes.
- Read the fine print: Look for notes about load size or how the figure was measured.
If the manual does not give a water amount, do not fill in a guessed average. Contact the manufacturer with the model information and ask whether it can provide water use for the cycles you use. If the manufacturer does not state a figure, you can still track the change in your household use, but you may not be able to separate laundry from other water use without a suitable meter.
Estimate what laundry adds to your water use
Use the machine’s stated amount for the setting you normally choose, if that figure is available. Then combine it with how often you run that setting. This gives you an estimate for laundry, not an exact bill, because your actual load size and selected options may differ from the conditions behind the manufacturer’s figure.
- Write down your usual settings. Note the wash setting you use most, whether you add an extra rinse, and whether your loads are usually small, medium, or full according to the manual’s guidance.
- Find the matching water figure. Use the manual or manufacturer’s product details. If the stated amount is for a different setting, do not treat it as an exact match. Ask the manufacturer whether it has information for your usual setting.
- Count your usual loads. For a typical week, keep a simple note each time you run the washer. Record the setting and any extra rinse so you can tell which cycles fit the figure you found.
- Multiply the matching figure by the number of those cycles. If the figure is stated per cycle, multiplying it by the number of matching cycles gives an estimated weekly laundry total. Keep other settings separate if they have different stated amounts.
- Compare like periods. To estimate a month, use a typical month of laundry rather than assuming every week is identical. Compare the result with your water bill only after checking that the bill covers the same length of time.
If you cannot find a per-cycle figure, track how many loads you run and note the settings. That record can help you ask the manufacturer a specific question, but load count alone cannot tell you the water volume. Avoid treating the change on your bill as laundry’s exact share: showers, toilets, dishwashing, outdoor use, and leaks can also affect household water use.
For a closer household comparison, note the water meter reading at the beginning and end of a period when you can keep other water use as similar as possible. This shows total household use, not the washer’s use by itself. Don’t open plumbing or handle electrical parts to measure washer water. If you suspect a leak or see water pooling around the machine, stop using it and contact a qualified repair professional or plumber.
Small changes can make your estimate more useful. If you choose extra rinses often, record that rather than counting those loads as ordinary cycles. If you sometimes run a small load and sometimes a full one, keep the two types separate when the manufacturer provides different information. A short record is more reliable than assuming every trip to the laundry room uses the same amount.
FAQs
Does an extra rinse use more water?
Yes, an extra rinse adds another rinse step, so it can raise water use. The amount depends on the washer and setting. Check the manual for information about that option, and include it in your household count when you use it.
Can I work out the washer’s exact water use from my water bill?
Usually not from the bill alone, because the bill covers water used throughout your home. A meter reading shows total household use, not how much went to the washer. Use a manufacturer’s per-cycle figure for an estimate, or ask the manufacturer if the manual does not give one.
Why might my actual use differ from the figure in the manual?
The stated figure may describe a particular cycle, load, or measurement method. Your load size, wash setting, and rinse choices can differ from those conditions. Check the manual’s notes and compare only cycles that match the stated information.





















