Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Long Does an Average Washing Machine Last?

Prime for Young Adults: check your eligibility on Amazon

A washer that starts thumping during a spin can make its owner wonder how much life it has left. Most washing machines last around a decade, but that’s a rough guide, not a deadline.

Frequent loads and packed or unbalanced laundry can add wear, while following the care instructions and cleaning away residue can help the machine keep going. A small washer may have a different lifespan, too, depending on how often it runs and how it’s used. One repair doesn’t automatically mean it’s time for a new machine, so the signs of a fixable fault matter as much as age.

What makes a washer wear out sooner?

A washer’s age is only one clue. A machine that runs several loads most days may wear sooner than one used now and then, especially if its loads are heavy or packed tightly. The number of years alone cannot tell you whether a particular washer is near the end.

Overloading puts extra strain on the washer and can leave clothes poorly washed. A load that is too small or unevenly arranged can also shift to one side during spinning. That may make the machine shake, pause, or move across the floor. Follow the load-size instructions in your manual, and spread bulky items around the basket instead of piling them together.

Care matters, too. Too much detergent can leave soap buildup, while leftover water and residue can contribute to stale smells. Cleaning the washer as directed in the manual and dealing with small problems early can help you avoid extra wear. A washer still needs normal repairs over time, even when you care for it well.

How can you tell if a washer is near the end?

One fault does not automatically mean the washer is worn out. A drain hose that has slipped out of place, an unbalanced load, or a blocked filter may cause trouble that is fixable. Look for a pattern of recurring problems, rather than deciding based on one noisy or unfinished load.

  • One-time shaking: Stop the cycle and spread the clothes evenly around the basket. If the washer settles and spins normally after you correct the load, the cause may have been an off-balance load.
  • Repeated shaking or walking: Check that the washer sits level and does not rock when you press gently on opposite corners. Uneven floor contact or a repeated imbalance can cause loud shaking. Follow the manual’s instructions for adjusting the feet, or ask for help if you cannot make the machine stable.
  • Water left inside: Look for a kinked or pinched drain hose, then check the manual for safe steps to clear the drain area or filter. If the washer repeatedly fails to drain after simple checks, it may need repair.
  • Leaks: Notice when the water appears and whether it comes from a hose connection, the door area, or underneath the machine. A loose connection may be simple to address, but a leak that keeps returning needs attention before it damages the floor.
  • Repeated cycle problems: If the washer often stops, will not fill, or leaves clothes unusually wet, note what happens and when. A single interruption may have a simple cause, but recurring failures suggest a fault that should be diagnosed.
  • More than one problem: A washer that leaks, drains poorly, and makes new noises may have broader wear than one with a single fixable issue. Ask a repair professional to identify the cause before paying for repeated repairs.

A burning smell, smoke, sparks, or water near an electrical outlet calls for immediate action. Stop using the washer. If you can do so without stepping in water or touching wet electrical parts, switch it off and unplug it; otherwise, keep away and get qualified help. Do not restart it just to see whether the problem returns.

Do compact washers last as long?

A compact, portable, or small washer does not have a guaranteed lifespan that matches a full-size machine. Its useful life depends on how often you use it, the size and balance of each load, its upkeep, and whether parts and repairs are available. Check the manual for the machine’s load limits and care instructions rather than assuming its size makes it more or less durable.

For example, a renter who washes a few small loads each week may put less regular strain on a compact washer than someone who runs several large loads every day. But small capacity does not mean you can cram in a bulky blanket. A load that exceeds the washer’s instructions can strain the machine or leave it unbalanced.

Some portable washers require you to move laundry between a wash tub and a separate spin basket. Others handle the cycle automatically. The steps differ, so follow the manual for your model. Make sure the drain hose is set up as directed, and never leave a running portable washer unattended if a leak could go unnoticed.

If you move a compact washer often, check its hoses and connections each time you set it up. Keep it on a stable, level surface, and use only the hookups and outlet allowed by the manual. A loose drain hose or unstable placement can cause trouble even if the washer itself is still in good shape.

Should you repair or replace your washer?

Decide based on the fault, the repair estimate, the washer’s condition, and whether parts are available. Age can help frame the decision, but it is not a rule that says every older washer must go or every newer one is worth repairing. Ask a repair professional to explain what failed and whether other worn parts are likely to need attention soon.

A repair may make sense when the problem is limited, the washer has otherwise worked reliably, and the repair cost is reasonable for your household. A washer that only needs a drain issue corrected is a different case from one with repeated leaks, poor spinning, and a growing list of faults. Ask whether the repair includes the cause of the problem, not just a temporary fix to one symptom.

Replacement may make more sense when repairs keep piling up, the same fault returns, or a major repair costs too much compared with replacing the machine. Also consider the practical cost of waiting: a washer that fails during a busy week can mean missed laundry, trips to a laundromat, or a risk of water damage. You do not need to wait for a complete breakdown if the washer has become unreliable.

Before agreeing to a repair, ask for the full estimate, including parts and labor, and whether the needed part is available. Before replacing the washer, check that the new machine will fit the space and work with your water hookups, drain, and electrical outlet. If you are comparing replacement options, the guide to washing machines under $300 may help you review choices, but confirm the details for any model you consider.

How can you help your washer last longer?

These habits reduce avoidable strain and make it easier to spot trouble before a small issue becomes a leak or a missed load.

  1. Load it as directed. Check the manual’s load guidance, leave room for clothes to move, and balance bulky items around the basket. Do not push down a load to squeeze in one more towel.
  2. Use the right detergent amount. Follow the detergent label and washer manual. If you see thick suds or soap residue, use less next time rather than adding more detergent to fix a poor wash.
  3. Keep the washer level. If it rocks, follow the manual to adjust its feet. Do not keep running it through violent shaking, since repeated movement can strain parts and pull on hoses.
  4. Check hoses and the drain path. Look for kinks, drips, or loose connections when setting up the washer and after moving it. Keep hoses routed as the manual directs, and close the water shutoff valves when the washer will be unused for an extended period, if the manual recommends it.
  5. Clean it on schedule. Use the cleaning steps in the manual, and clear the lint screen or lower filter catch only if your washer has one and the manual explains how. A washer drum cleaner guide can help if you are looking for a cleaning product, but follow your washer maker’s instructions before using one.
  6. Let the inside dry. After a load, wipe away visible moisture and leave the lid or door open when practical, as the manual allows. This helps reduce the damp, stale smell that can develop in a closed washer.
  7. Act on changes early. Note new sounds, repeat error messages, slow draining, or small leaks. Stop using the washer if a leak could reach electrical parts, the floor is becoming unsafe, or you notice smoke or a burning smell. Call a qualified repair person instead of opening electrical or sealed parts yourself.

If you want a simple cleaning routine, use the washer’s own cleaning cycle if it has one and follow the manual for the cleaner and frequency. Do not mix cleaning products. If the washer still smells, drains poorly, or leaks after the steps the manual allows, arrange repair rather than repeatedly running it.

FAQs

Does a noisy spin mean the washer needs replacing?

Not by itself. Pause the cycle, spread the load evenly, and check that the washer is level. If the noise continues with an ordinary balanced load, or suddenly becomes much louder, stop using the machine and ask for repair advice.

Is it worth repairing a washer that is still fairly new?

Often, a single repair can be worthwhile, but age alone cannot settle the question. Ask what caused the fault, what the repair will cost, and whether the same problem is likely to return. Check any warranty paperwork before paying for service.

Can using too much detergent shorten a washer’s life?

Too much detergent can leave residue and create excess suds, which may contribute to draining problems or leaks. Use the amount directed by the detergent label and washer manual. If residue remains, clean the washer as the manual instructs.

Should I keep using a washer that leaks a little?

No. Stop the cycle and turn off the water supply if you can reach the shutoff valves safely. A small leak can spread and damage flooring, so do not run the washer again until you have found and corrected the cause or arranged repair.

4.5
2 ratings
James Patterson
WRITTEN BY
James Patterson
Hi, I'm James, a home appliance nerd hailing from New York City. Armed with my trusty Electrical Engineering degree from MIT and 10 years of experience, I've been helping people navigate the wild world of smart home tech.