Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Do You Stack a Washer and Dryer Safely?

Prime for Young Adults: check your eligibility on Amazon

Many people assume a dryer can sit on any washer as long as the two appliances fit. That isn’t safe: stack them only when both manuals approve the exact models and call for a stacking kit, the parts that hold the dryer in place above the washer. The dryer goes on top, and the kit must secure it; don’t place one appliance directly on another.

The answer depends on whether your washer is a front-load model approved for stacking, whether you have the kit specified for both appliances, and whether the floor, space, and hookups suit the pair. A poor fit or loose connection can let the dryer shift or fall. Check these details before lifting anything, then follow the setup steps below.

The Short Version

  • Check both appliance manuals for the exact washer and dryer model numbers. Stack them only if the manuals approve that pair.
  • Use the stacking kit named in the manuals. The kit has parts made to hold the dryer securely above the washer.
  • Place the dryer above the washer, follow the kit instructions in order, and have another person help lift and position it.
  • Before running either appliance, check that the pair sits evenly, the dryer is secured, and hoses, cords, and vents are connected as the manuals require.

Confirm Your Washer and Dryer Can Be Stacked

Start with the model numbers, not the brand names or the appliances’ outside appearance. Find each model number on the appliance label, then look up the matching manuals on the manufacturers’ websites or in the paperwork that came with the machines.

Read the installation sections in both manuals. Each one needs to allow stacking with the other model, or point you to a list of approved pairings. A dryer and washer from the same brand are not automatically a safe match. Similar size or shape does not prove that the dryer can be held securely on that washer.

Check these points before buying parts or moving the appliances:

  • Washer type: Confirm that the washer is a front-load model, meaning its door is on the front, and that its manual allows a dryer to sit above it. Many top-load washers are not made for this setup, and a lid that opens upward may not have room to work.
  • Exact pairing: Look for both model numbers in the manuals’ stacking instructions. If the instructions list only a washer or dryer family, confirm that your specific model belongs to it.
  • Location: Check that the floor is firm and even, and that the space leaves room to open the doors and reach the controls. The stacked pair must also fit without pressing hard against walls or blocking access to shutoff valves.
  • Connections: Make sure the water hoses, drain hose, electrical cords, and dryer vent can reach their connections without being stretched, crushed, or sharply bent.

If the manuals disagree, the model numbers are missing from the approved pairing information, or you cannot find clear instructions, pause. Ask the manufacturer or an appliance professional to confirm compatibility before stacking. Do not assume a different kit will make an unapproved pair safe.

Find the Right Kit and Read Both Manuals

A stacking kit is the set of parts made to hold a dryer securely above a washer. The kit must be approved for your particular washer and dryer models. A kit that looks close, fits one appliance, or is described as a general match may not lock the two machines together as required.

Use the kit name or part information given in the manuals, then confirm the kit fits both model numbers with the manufacturer or seller. Check that all listed pieces and fasteners are included before you start. If anything is missing, damaged, or different from the instructions, stop and get the correct part rather than substituting a screw or strap.

Read both manuals and the kit instructions all the way through before moving either appliance. The washer manual may explain how the washer must sit, while the kit instructions explain how its parts attach. The manuals also tell you which way the dryer faces, where the kit pieces go, and whether a specific connection needs attention.

Keep the instructions nearby during the job. Do not copy a setup from a video or from another laundry pair unless the same instructions approve it for your models. Small differences in the base, control panel, or attachment points can change how the kit fits.

Prepare the Space and Hookups

Get the area ready before lifting anything. A dryer is awkward to hold, and searching for a hose connection while someone is supporting its weight is a recipe for a dropped appliance or strained back.

  • Clear a path from the appliances to their final spot. Remove rugs, laundry baskets, and anything else that could trip the people carrying the dryer.
  • Check the floor for a soft, damaged, or sloping area. The washer needs to sit evenly and without rocking; the floor must support the stacked pair.
  • Confirm that the space allows the washer and dryer doors to open and leaves access to the water shutoff valves, drain, electrical outlets, and dryer vent.
  • Compare the needed hose and cord routes with the manuals. Each connection should reach without being pulled tight or trapped behind the machines.
  • Turn off the washer’s water supply before moving hoses. Unplug both appliances before handling their connections, unless the manufacturer gives a different safe instruction for a specific setup.
  • Ask someone to help move the washer and dryer. Plan where each person will hold and where the dryer will rest while the kit is fitted.

Do not stretch a power cord, pinch a water hose, or bend a dryer vent sharply just to make the machines fit. If the connections cannot reach without strain, change the layout or ask an appliance professional about suitable parts and placement. A cramped fit can turn a neat-looking setup into a leak, poor airflow, or damaged connection.

Stack and Secure the Appliances

Follow the manuals and kit instructions for the exact attachment points and order. These steps describe the general sequence, but the model-specific instructions take priority. Keep hands clear of pinch points, and do not try to catch or hold a tipping appliance by yourself.

  1. Make the washer ready. Position the washer where it will stay, with enough room to reach its sides and back while fitting the kit. Check that the washer sits evenly and does not rock. Adjust its feet only as the manual directs.
  2. Fit the kit to the washer. Attach the approved kit parts at the points shown in its instructions. Use the supplied fasteners and the stated order. Do not leave out a piece because it seems unnecessary, and do not add homemade brackets or straps.
  3. Prepare the dryer. With help, move the dryer close enough to reach the washer without resting it loosely on top. Connect or position the vent and other parts only as the manuals direct; do not trap them between the machines.
  4. Lift the dryer with help. Have at least one other person assist, and use a safe lifting method. Keep the dryer steady as you raise it onto the washer. If you cannot control its weight or keep it from tipping, lower it safely and get more help.
  5. Set the dryer into place. Align it with the kit parts exactly as shown. Do not slide or force it into position if a bracket catches or the dryer does not sit flat. Lift it clear and check the alignment instead of pushing harder.
  6. Fasten the dryer. Secure every required clip, screw, or other supplied part in the order shown. Confirm each one is fully in place. The kit, not the dryer’s weight or a tight fit against the wall, must hold it securely.
  7. Reconnect and inspect. Route hoses, cords, and the vent so they are not crushed or stretched. Reopen the washer’s water supply only after its hoses are connected as instructed, and plug in the appliances according to their manuals.

Before running a cycle, look along the sides and back where you can safely see them. Confirm the dryer is seated on the kit, required fasteners are present, and the washer remains level without rocking. Make sure the doors open freely and no hose, cord, or vent is caught beneath or behind either appliance.

Follow the manuals for any first-use checks and operating instructions. If the pair shifts, rocks, makes an unusual sound, leaks, or has a connection that looks strained, stop using it. Turn off the water if you see a leak, unplug an appliance only if you can do so safely, and arrange help to correct the setup before using it again.

Know When to Stop and Get Help

Get help before lifting if the dryer feels too heavy, the path is awkward, or you cannot keep it steady with the people available. Never stack it alone. A slip can injure you, damage the dryer, or crush a hand or foot.

Stop if the kit does not line up with the attachment points, a fastener will not fit, the dryer sits unevenly, or the washer rocks after adjustment. Do not drill new holes, force parts into place, or use a kit meant for a different pairing. Contact the manufacturer or a qualified appliance professional for guidance.

Call a qualified professional if the floor feels weak, the hookups cannot reach without strain, or you are unsure how to connect the dryer vent or electrical supply. For rental housing, check with the property owner before changing the setup. If you want help selecting a replacement washer, this guide to what to look for in a reliable washing machine may help, but the new model must still be approved for the dryer you plan to stack.

FAQs

Does the dryer always go on top?

For an approved washer-and-dryer stack, the dryer goes above the washer, as the manuals specify. Do not reverse the order or place one appliance on the other just because their shapes seem to fit.

Do I need a special kit to stack them?

Use the stacking kit specified for your exact washer and dryer models. The kit’s parts hold the dryer in place; furniture straps, loose boards, or a kit that is not approved for the pair are not substitutes.

Can I stack the appliances by myself?

No. Get help lifting and positioning the dryer, and do not attempt the lift if the people helping cannot control it safely. Call an appliance professional if you cannot move it without risking a fall or injury.

What should I check before turning the appliances on?

Confirm that the dryer is secured to the approved kit, the washer sits evenly without rocking, and the doors open freely. Check that the hoses, cords, and vent are connected as the manuals direct and are not pinched, stretched, or crushed.

Related guides: can you stack a washing machine on top of dryer.

4
1 ratings
Justin Santiago
WRITTEN BY
Justin Santiago
Justin Santiago - Justin is a home appliances editor with an unwavering passion for outdoor cooking and grilling appliances. Based in Austin, Texas, Patrick has over 20 years of experience in the field. He is known for his engaging guides on choosing the best grills and outdoor kitchen appliances.