Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Do I Prevent Mold and Mildew in My Washing Machine?

Prime for Young Adults: check your eligibility on Amazon

Leave the washer open to air-dry when it’s safe, take damp clothes out promptly, and clean the drum and parts that hold moisture or soap residue. The right cleaning method depends on your washer, so follow its manual.

A front-load washer’s rubber seal can hold water, while a top-load lid can trap damp air. Portable twin-tub washers may need different care from automatic machines, especially around their tubs and drainage. Use only cleaning products the manual allows, and pay attention if water remains in the washer or the musty smell keeps returning. First, here’s why moisture and leftover residue cause that stale odor.

The Short Version

  • After each wash, take out the laundry and wipe away water you can see around the opening, lid, or seal.
  • Leave the door or lid open to let the inside dry, if it is safe to do so in your home.
  • Clean the drum and any damp, residue-prone parts on the schedule and with the products in your washer manual.
  • If water stays in the washer or the musty smell keeps returning, check for a drainage problem and contact a repair professional if you can’t safely resolve it.

Why a Washer Can Smell Musty

A musty smell usually means moisture, detergent residue, or both are lingering inside the washer. A closed door or lid traps damp air, while soap and dirt can cling to surfaces instead of rinsing away. Given time, that damp, dirty film can smell stale and may support mold or mildew growth.

The spots that stay wet depend on the machine. A front-load washer can hold water and residue in the rubber seal around the door. A top-load washer may stay damp around the lid, the top edge of the basket, or the area beneath an agitator or wash plate.

Compact machines need the same basic care, but their parts and drainage can differ. A portable automatic washer may have a drain pump and a lint screen or filter, while a twin-tub machine has a wash tub and a separate spin basket. Check your manual before cleaning or taking anything apart.

Detergent residue is more likely when you use more detergent than the washer needs or use a product the manual does not allow. Too many suds can leave a film behind. Follow the detergent label and your washer manual, especially if the machine calls for low-suds HE detergent.

What to Do After Every Load

  1. Remove the laundry promptly. Take clothes out when the cycle ends rather than leaving a wet load in the washer. Damp clothes held in a closed machine can pick up a stale smell, even if the washer itself was clean.
  2. Look for visible water. Check around the door opening, rubber seal, lid, and top edge of the inner basket. If you see water, wipe it with a clean cloth. Don’t pull or stretch a seal to reach hidden areas.
  3. Leave the door or lid ajar. Let fresh air reach the drum so it can dry between loads. Keep the opening clear of children and pets, and don’t leave it open if it creates a safety or access problem. If you can’t leave it open, wipe the damp areas you can reach and allow the washer to air out when it is safe.
  4. Keep detergent use within the directions. Measure detergent as its label and the washer manual direct. More soap does not mean cleaner clothes; extra residue can collect inside the machine.
  5. Check for leftover water. Look in the drum after the washer finishes. A small amount of moisture on a surface is different from water sitting in the bottom. If a pool remains, don’t ignore it; use the troubleshooting steps below.

If your washer is in a tight closet, laundry nook, or RV, make sure the open door or lid won’t block a walkway or be bumped shut. The aim is to let the inside dry, not to create a trip hazard or leave the machine where a child or pet can climb into it.

How to Clean the Drum and Damp Parts

Use the cleaning method in your washer manual. Machines differ in which cleaners they allow, where filters are located, and whether they have a drum-cleaning cycle. If your manual is missing, look up the instructions for the exact washer model before adding a cleaner or removing a part.

  1. Empty the washer. Take out clothing and other items. Check the drum for loose lint, hair, or small objects, and remove anything you can reach without forcing a part.
  2. Wipe the surfaces you can safely reach. Use a soft cloth to clean the inside of the door or lid and the visible edge of the drum. For a front-load washer, gently wipe the folds of the rubber seal. Don’t use a sharp tool or pull hard on the seal.
  3. Clean the detergent drawer if your washer has one. Follow the manual for removing and rinsing it. Clear any visible soap residue, then dry the drawer and the area where it sits before putting it back. Don’t force a drawer that won’t come out easily.
  4. Clean the lint screen or filter only as directed. Some washers have a lint screen or a lower filter that catches lint and other debris. The location and safe cleaning method vary. If the manual says to open a filter, follow its steps for catching any water first; don’t open a panel if you can’t identify the part or control the water.
  5. Run the washer’s cleaning cycle, if it has one. Use only the cleaner and amount allowed by the manual. If there is no cleaning cycle, follow the manual’s alternative instructions instead of choosing a cycle or cleaner at random.
  6. Leave the inside open to dry afterward. When the cleaning cycle ends, wipe away any water that remains in accessible areas. Leave the door or lid ajar when it is safe.

Cleaning frequency depends on the washer, how often you use it, and the manual’s directions. Follow the stated schedule if the manual gives one. If it doesn’t, clean the machine when residue or odor appears, and keep up the after-load routine so moisture and soap have less chance to build up.

A cleaner made for washer drums may be an option only if your manual permits that type of product. Check the label and the washer instructions before buying or using one. For help understanding what these cleaners are for, see this guide to washer drum cleaners, then confirm that any cleaner you choose is allowed for your machine.

Habits and Cleaners to Avoid

  • Don’t shut a damp washer immediately. A sealed, wet interior takes longer to dry and can keep a stale smell around.
  • Don’t leave wet clothes sitting inside. Move them to the dryer or a drying rack as soon as practical.
  • Don’t pour in extra detergent or fabric softener. Follow the product label and washer manual to reduce leftover film.
  • Don’t mix cleaning products. Never combine bleach with vinegar, ammonia, or another cleaner. Mixing products can create dangerous fumes. If you have already mixed cleaners and notice fumes or feel unwell, leave the area and contact emergency services or poison control for guidance.
  • Don’t use a cleaner just because it works in another washer. Check the manual first. A cleaning product or method that is allowed for one machine may not be right for yours.
  • Don’t reach into a moving washer or remove panels to clean inside. Turn the washer off before wiping accessible surfaces. Leave repairs and unfamiliar parts to a qualified professional.

What to Do if the Smell or Water Returns

If the musty smell remains after you clean the washer, check whether the drum is draining fully. Water sitting in the bottom after a cycle can point to a blocked or kinked drain hose, a clogged filter, or another drainage problem. A recurring odor is harder to fix if water keeps lingering inside.

Check the visible drain hose for a sharp bend or pinch, but don’t pull the washer away from the wall if doing so could strain a hose or spill water. For a portable machine, follow its manual because some models drain with a pump and others rely on the hose position. Don’t assume the same setup applies to every portable washer.

If the manual identifies a filter that you can clean, follow its instructions and prepare for water to come out. Stop if the washer is leaking, the filter is stuck, you can’t safely reach the part, or you’re unsure how to keep water contained. A repair professional can check a clog or internal drainage fault without risking damage to the machine or your home.

Contact a qualified repair professional if water remains after the steps in the manual, the washer leaks, or the odor returns quickly despite proper cleaning and drying. Stop using the washer if it is leaking near an electrical outlet or its plug, and avoid touching wet electrical parts. Get help rather than continuing to run the machine.

Once the washer drains normally and the damp surfaces have been cleaned and dried, the smell should become less noticeable. If it does not, or if you see mold in an area you can’t safely reach, ask the manufacturer or a repair professional about the next safe step. Don’t scrape or dismantle hidden parts on your own.

FAQs

Should I leave the washer door or lid open between loads?

Yes, leave it ajar when you can do so safely. That lets damp air escape instead of keeping it trapped in the drum. Keep children and pets away from the opening, and wipe accessible wet areas if leaving it open isn’t practical.

How often should I clean my washing machine?

Follow the schedule in your washer manual, because cleaning instructions vary by machine. If the manual doesn’t give a schedule, clean the washer when you notice residue or odor and keep up the routine after each load. Use only cleaning products the manual allows.

Which parts should I wipe after a wash?

Wipe visible moisture from the door or lid, the opening, and accessible edges of the drum. On a front-load washer, gently wipe the folds of the rubber seal. Clean a detergent drawer or filter only as the manual directs.

What if the washer still smells musty after cleaning?

Check for standing water and look for a visibly kinked drain hose, following the manual for your machine. A clog or drainage fault can make odor return. If water stays in the drum, the washer leaks, or the smell persists after proper cleaning, stop and contact a qualified repair professional.

4.3
3 ratings
Helen Thrower
WRITTEN BY
Helen Thrower
In Dallas, Helen Thrower, a female editor known for her fascination with innovative designs, explores the realm of home appliances. With a degree in Industrial Design, she paints vivid pictures of modern, smart appliances for her readers.