Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How Deep Is a Washer and Dryer? Measure Before You Buy

Prime for Young Adults: check your eligibility on Amazon

The washer sticks out past the closet opening, and now the dryer may not fit beside it. There’s no single depth for every washer and dryer; the front-to-back size depends on the type and model, so check each appliance’s listed depth before buying or moving it.

The number on the product page may not include parts that stick out, such as a door or knobs. Hoses and the power cord also need space behind the appliances, and front-load, top-load, stacked, and all-in-one designs can have different needs. Measure the full space, including room to open doors and any extra space the maker requires. Start by checking what the listed depth includes and how to measure your laundry area.

Check what the listed depth includes before comparing models

Washer and dryer depth changes with the appliance’s type and design. A front-load washer, a top-load washer, a stacked pair, and an all-in-one unit can each take up a different amount of front-to-back space. Even two appliances with similar listed depths may need different room once you account for the parts that stick out and the space needed to connect them.

The listed depth is the front-to-back measurement shown on the product page. Check the dimension diagram or product manual to see where that measurement starts and ends. Some measurements may include a door, handle, or knobs; others may show the cabinet only. If the listing does not make this clear, ask the manufacturer before you rely on that number.

Use the exact dimensions for the washer and dryer you plan to install. A pair sold together does not necessarily have matching depths. A stacked setup also uses the depth of its appliances; stacking changes the height, not the need to check the front-to-back space and connection clearance.

Measure the space and compare it with each appliance

Measure the available space before ordering or moving a machine. A closet that looks deep enough from the doorway may have a baseboard, pipe, door trim, or other obstacle that reduces the usable space behind the appliance.

  1. Measure the full opening. Use a tape measure to find the distance from the back wall to the front edge of the space where the appliance will sit. Keep the tape level and measure on the floor, where the machine will rest.
  2. Check for obstacles. Look behind and beside the planned location for baseboards, water valves, drain pipes, wall outlets, door trim, and shelves. Measure how far each one projects into the space. The shallowest usable point may set the limit.
  3. Measure more than one spot. If the walls or closet opening are uneven, measure near the floor and higher up. Check the opening at the front, too. A machine might fit inside the closet but still be too wide or deep to pass through the doorway.
  4. Find the listed depth for both appliances. On each product page, open the dimensions section or the dimension drawing. Confirm whether the number includes the door, handle, or controls that project forward.
  5. Compare the measurements with the installation instructions. Allow for the connections behind the machine and any extra space the manufacturer says to leave. Do not count on pushing the appliance hard against the wall to make it fit.

Write down the usable depth and the listed depth for each machine. Then note the extra room needed behind and in front. If the available space only works when every connection is squeezed flat, the fit is too tight to count on.

Leave room for hoses, cords, and the maker’s clearance

The appliance cabinet is not the whole installation. Hot and cold water supply hoses, the drain hose, and the power cord take up room behind a washer. Hoses can bend, but they should not be crushed between the appliance and the wall. A pinched hose can make installation difficult or interfere with water flow.

  • Check where the water shutoff valves and drain connection sit. A valve or pipe directly behind the washer may take up more space than one set to the side.
  • Look at the manual for the maker’s installation clearance, which means the extra space the maker says to leave around the appliance.
  • Confirm how the power cord and hoses are meant to be routed. Do not force them into a sharp bend or trap them beneath the machine.
  • Check whether the dryer needs a vent connection and where that connection sits. The setup can affect how far the dryer can sit from the wall.
  • Leave enough access to reach shutoff valves and connections if they need attention later.

Clearance needs vary by model and installation. Use the instructions for the exact appliance, not a guess based on another washer or dryer. If the manual gives a range or a diagram, follow it; if the space is unclear, ask the manufacturer or an installer before moving the machine into place.

Before connecting or moving an appliance, keep hands clear of hoses and cords, and do not pull a washer or dryer by its door or control panel. If moving the machine could strain a water line, cord, or vent, stop and get help from someone qualified to handle the installation.

Make sure doors can open and people can pass

A machine can fit inside a closet and still make laundry awkward if its door hits a wall or blocks the walkway. Check the space in front of the appliance as carefully as the space behind it. Consider how far the washer door or dryer door swings open, and whether the direction can be changed for that model.

  • Use the product drawing or manual to check the door’s swing and how far it projects when open.
  • Check whether a nearby wall, cabinet, laundry basket, or second appliance will block the door.
  • Open the closet or laundry-room doors as far as they normally go. Make sure they do not hit the appliance or prevent you from reaching its controls.
  • Think about the path you use to load and unload clothes. You should be able to stand in front of an open door without blocking a hall or trapping yourself in a narrow space.
  • For a top-load washer, check overhead space and the room needed to lift the lid fully.

Controls need to remain easy to reach, too. A machine that fits only when pushed deep into a closet may leave buttons or a display hard to see. Check the control location on the product drawing and picture yourself starting a cycle, opening the door, and removing a full load.

Closet doors can change the fit even if the appliances themselves fit. If the doors must stay closed during operation, check the appliance instructions for any required ventilation or door-opening guidance. Do not assume a closet door can remain shut simply because it closes around the machines.

Verify these details before you buy or move the pair

Before you commit, match the product dimensions to the actual room and the route into it. The laundry nook is only one part of the job. A washer may fit in its final spot but fail to pass through a hallway turn, doorway, or stair landing on the way there.

  • Confirm the complete dimensions. Check the listed depth, width, and height for each appliance. Look for a drawing that shows doors, handles, and other parts that project beyond the cabinet.
  • Check the route. Measure the narrowest doorway and tightest turn between the delivery point and the laundry space. Include door trim and any nearby obstacles.
  • Compare the connection locations. Check where hoses, the drain, power cord, and dryer vent connect, then compare those locations with the outlets and hookups in your room.
  • Read the installation instructions. Confirm the required space around the appliance, door-opening needs, and any instructions about the closet or vent.
  • Ask about unclear measurements. If the product page does not say whether its depth includes a door or handle, contact the manufacturer for clarification before buying.

Do not remove a door, change a hookup, or force an appliance through a tight opening just to make it fit. If the route or connections require plumbing, electrical, or vent changes, ask a qualified professional what the installation involves. That is safer than discovering a problem after the appliance is wedged into place.

A fit is more than a cabinet measurement. You have a workable plan when each appliance can reach its final position without crushing a connection, the required clearance is available, and doors and controls remain accessible. If one of those conditions is uncertain, pause and verify it before delivery or moving day.

FAQs

Where do I find the depth on a washer’s product page?

Open the dimensions section or look for a drawing that labels the appliance’s height, width, and depth. Check the manual as well if the page does not say whether the depth includes the door or handle. If that detail is still missing, ask the manufacturer.

Should I include hoses when measuring?

Yes. The listed depth may describe the appliance itself, but the hoses and cord need room behind it. Check the connection locations and the installation instructions so you do not leave them squeezed against the wall.

Does a stacked washer and dryer need a different depth?

Stacking mainly changes the height, but you still need to check the depth of each appliance and the space for its connections. Confirm that the specific pair is approved for stacking and follow the maker’s installation instructions.

How can I tell whether both machines will fit in my closet?

Measure the usable space from the back wall to the front, then account for obstacles, connections, and the clearance in each manual. Check the opening and door swings, too. The machines need to fit the route into the closet as well as the final space.

Related guides: what is deep wash on washer and what is deep fill on washer.

5
1 ratings
Jessie Greene
WRITTEN BY
Jessie Greene
My name is Jessie Greene, a male home appliance expert from Los Angeles specializing in the luxury sector. For the past 12 years, I've been guiding consumers through the intricate world of high-end appliances.