Topappliancesreviews.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Can You Run an Empty Washer Cycle With Bleach?

Prime for Young Adults: check your eligibility on Amazon

Usually, yes, but check the washer manual first. Use bleach in an empty cleaning cycle only if the manual allows it and explains where to add it.

The right steps depend on your washer’s built-in tub-cleaning setting, the compartment for bleach, and the bleach label. The wrong amount or place can leave residue or harm parts, and bleach must never be mixed with another cleaner. If the manual doesn’t mention bleach, don’t guess. Start by checking these details before you run the cycle.

The Short Version

  • Use bleach in an empty washer only when the washer manual allows it for tub cleaning and explains where and how much to add.
  • Check the washer’s cleaning-cycle directions and the bleach label before pouring anything in.
  • Never combine bleach with a washer cleaner, vinegar, ammonia, or another cleaning product. Mixing cleaners can release dangerous fumes.
  • If the manual doesn’t approve bleach or gives no directions, use the cleaning method it does recommend or ask the washer’s manufacturer.

Can You Run Bleach in an Empty Washer?

Whether an empty bleach cycle is right for your washer depends on its manual. Some washers allow bleach for cleaning the tub, while others give different instructions or don’t approve it for that purpose. The manual is the safest place to check before adding bleach.

That matters because bleach can affect washer parts or leave residue if you use the wrong kind, amount, or compartment. A musty smell can make an empty bleach cycle seem like an easy fix, but guessing at the dose or cycle can create a new problem instead.

Look in the manual for terms such as “clean washer,” “tub clean,” or “washer cleaning.” Find out whether bleach is allowed for that setting, what kind of bleach to use, and where it goes. Follow those directions as written, even if they differ from general advice.

Bleach may help clean the washer when the manufacturer permits it, but don’t assume it will solve every odor. Leftover detergent, dampness, or dirt can also contribute to a musty smell. If the odor returns after the approved cleaning cycle, follow the manual’s other cleaning and care steps.

What to Check Before Adding Bleach

  • The cleaning cycle: Check whether the washer has a built-in tub-cleaning setting, which is a cycle meant to clean the washer itself. Read the manual to see whether that setting allows bleach. Don’t substitute a regular wash cycle unless the manual says to.
  • The bleach compartment: Find the compartment marked for bleach, if your washer has one. A dispenser is the compartment where you add bleach. The manual should say whether bleach belongs there or somewhere else. Don’t pour it into a compartment marked for detergent or softener.
  • The bleach directions: Read the bleach label and confirm that the product is suitable for laundry use. Then check the washer manual for the allowed kind and amount. If the two sets of directions don’t clearly work together, stop and ask the washer’s manufacturer which instructions to follow.
  • Other cleaners: Check that the washer is empty and that you aren’t adding another cleaner. Don’t combine bleach with a washer-cleaning product, vinegar, ammonia, or any other cleaning chemical.

Keep the bleach bottle upright while you read its label, and avoid splashing it on clothing, nearby surfaces, or your skin. If bleach gets on you, follow the label’s first-aid directions. Store the bottle away from children and pets.

How to Run the Cycle Safely

Follow the washer manual’s cleaning steps from start to finish. The steps below are a safe order for checking the instructions, not a substitute for the directions for your particular washer.

  1. Take everything out. Check the inner basket and remove clothes, towels, and anything else left inside. Keep the washer empty for the cleaning cycle unless the manual specifically says otherwise.
  2. Find the right setting. Select the washer’s built-in tub-cleaning setting only if the manual directs you to use it with bleach. If it calls for another setting, use that one instead. Don’t choose a hotter, longer, or stronger cycle on your own.
  3. Confirm the bleach location and amount. Read the manual again if needed. Add only the type and amount it specifies, and put it in the named compartment or location. Don’t estimate by eye or assume that more bleach will clean better.
  4. Start the cycle and let it finish. Keep the washer closed or latched as the manual directs. Don’t interrupt the cycle to add another cleaner or extra bleach. If the washer shows an error or you notice a leak, stop and follow the manual’s safety and troubleshooting directions.
  5. Check what the manual says to do next. Some cleaning instructions may call for an additional rinse or another step. Follow the washer’s directions rather than adding a rinse or repeating the cycle automatically.

When the cycle is done, check the inside for visible leftover suds or residue. If the manual calls for another rinse, run it as directed. Don’t reach into a locked or moving washer, and don’t try to open the door or lid by force.

To help keep a musty smell from returning, follow the washer’s routine care instructions. If the manual says it’s safe, leave the door or lid open after loads so the inside can dry. Wipe away moisture where the care directions allow it, and clean any listed dispensers or filters as instructed.

What Not to Mix With Bleach

Never pour bleach into the washer with another cleaner. Bleach can react with ingredients in products such as vinegar, ammonia, toilet cleaner, drain cleaner, and some washer-cleaning products. The reaction can release harmful fumes, even if both products are commonly used for cleaning on their own.

Use one approved cleaning method at a time. If you already added a washer cleaner, don’t add bleach to the same cycle. Follow the cleaner and washer labels for what to do next, and don’t try to neutralize one product by pouring in another.

If you accidentally mix bleach and another product and notice strong fumes, coughing, burning eyes, or trouble breathing, leave the area immediately and get to fresh air. Keep other people and pets away. Call emergency services or poison control for guidance, especially if anyone has breathing trouble or symptoms that don’t quickly improve.

Don’t lean over the washer to smell the drum or try to decide whether fumes are harmless. A strong odor is a reason to move away, not to keep cleaning. Get help before returning to the area if fumes remain or anyone feels unwell.

What If the Manual Doesn’t Mention Bleach?

If the manual doesn’t say bleach is allowed for an empty cleaning cycle, don’t guess at an amount or use a cycle meant for something else. Look for the washer’s recommended cleaning method instead. The manufacturer may direct you to a specific washer-cleaning product or a different routine.

  • Check the manual’s tub-cleaning and care sections, including any notes about the bleach compartment.
  • Look up the washer’s care instructions on the manufacturer’s support site, using the model information shown on the washer or in its paperwork.
  • Contact the manufacturer if the instructions are missing or unclear. Ask whether bleach is allowed for an empty tub-cleaning cycle and, if it is, where and how much to add.
  • Until you get a clear answer, use only the cleaning method listed for your washer. Don’t combine that method with bleach.

If you want a cleaner made for washer tubs, check that its label says it is suitable for your washer and follow both the product label and washer manual. A washer drum cleaner guide may help you compare that kind of product, but it doesn’t replace the instructions for your machine.

If an unpleasant odor remains after you use the approved cleaning method, repeat only if the manual says to. Check for damp clothes left inside, moisture around the door or lid, or residue in areas the manual says you can clean. If the odor continues, or the washer leaks, shows an error, or behaves unusually, stop using bleach and contact the washer’s manufacturer or a qualified appliance repair professional.

FAQs

Can bleach damage my washer?

It can cause problems if the bleach type, amount, compartment, or cycle isn’t approved for your washer. Follow the manual’s instructions rather than using a dose or setting meant for another machine. If you can’t find clear directions, ask the washer’s manufacturer before adding bleach.

Where do I pour bleach?

Put bleach only where your washer’s manual says to put it. If the manual names a bleach dispenser, use that compartment; don’t assume a detergent or softener compartment is suitable. If there’s no clear direction, don’t pour bleach directly into the basket unless the manual tells you to.

Can I use bleach with a washer cleaner?

No. Don’t mix bleach with a washer-cleaning product or any other cleaner, including vinegar or ammonia. Use one cleaning method at a time and follow its label and the washer manual.

Should I use the washer-cleaning cycle?

Use the built-in tub-cleaning setting if the manual directs you to use it for cleaning with bleach. If the manual specifies a different setting or method, follow that instead. The cycle name alone doesn’t confirm that bleach is allowed.

4
1 ratings
Betty Smith
WRITTEN BY
Betty Smith
On a rainy Seattle day, you might find Betty Smith, our female home appliances editor, tinkering with her latest gadget. With a degree in Mechanical Engineering and 15 years of experience, Betty crafts practical tips and DIY repair guides that have resonated with readers nationwide.